HardLabs

NavPoTS-Bridge

RuberDuck9·NavPoTS·hardware/kicad/NavPoTS-Bridge/NavPoTS-Bridge.kicad_pcb

NavPoTS-Bridge PCB layout, top view — open source STM32 board by RuberDuck9

About the NavPoTS-Bridge PCB

NavPoTS-Bridge is an open source STM32 PCB design by RuberDuck9, published on GitHub under the AGPL-3.0 license. It is a 4-layer board measuring 58.9 × 58.9 mm, with 69 components from 28 distinct parts.

Its main chip is the STM32H743ZIT6, from the STM32 family. Other key parts include the MS561101BA03-50, H3LIS331DLTR, ASM330LHHXTR, MMC5983MA and USBLC6-2SC6. By type, the board carries 33 capacitors, 15 resistors, 9 connectors, 6 ICs, 4 diodes and 1 crystal.

Main components on the NavPoTS-Bridge

MS561101BA03-50H3LIS331DLTRASM330LHHXTRMMC5983MAUSBLC6-2SC6STM32H743ZIT6

NavPoTS-Bridge bill of materials (BOM)

69 components, 28 distinct parts.

QtyPartRefs
1
MS561101BA03-50
MS5611-01BA
TE Connectivity Measurement Specialties
U1
1
H3LIS331DLTR
STMicroelectronics
U2
1
ASM330LHHXTR
STMicroelectronics
U3
1
MMC5983MA
Memsic Inc.
U4
1
USBLC6-2SC6
STMicroelectronics
U5
1
STM32H743ZIT6
STM32H743ZITx
https://www.st.com/resource/en/datasheet/stm32h743bi.pdf
U6
1
ECS-2520MV-250-CN-TR
ECS-2520MV-xxx-xx
ECS Inc.
Y1
1
Conn_01x06_Pin
J1
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
GCT
J2
1
ED555/6DS
Screw_Terminal_01x06
On Shore Technology Inc.
J3
4
PEC14SAGN
Conn_02x04_Top_Bottom
Sullins Connector Solutions
J4, J5, J6, J9
2
62684-402100ALF
Amphenol ICC (FCI)
J7, J8
2
MMSZ3V3T1G
3.3V
onsemi
D1, D2
2
LTST-C190KRKT
RED
Lite-On Inc.
D3, D4
1
HZ0805E601R-10
600R@100MHz
Laird-Signal Integrity Products
FB1
23
C0603C104K5RACTU
100nF(50V)
KEMET
C1, C2, C4, C5, C6, C8, C9, C10 +15
3
GRM188R6YA106MA73D
10uF(35V)
Murata Electronics
C3, C7, C31
1
C0603C103K5RACTU
10nF(50V)
KEMET
C21
2
CL10B105KA8NNNC
1uF(25V)
Samsung Electro-Mechanics
C22, C23
2
C0603C100J5GACTU
10pF(50V)
KEMET
C25, C26
Show 8 more
QtyPartRefs
2
CL10A225KO8NNNC
2.2uF(16V)
Samsung Electro-Mechanics
C32, C33
6
RC0603FR-0710KL
10k
YAGEO
R1, R2, R3, R4, R5, R6
1
RC0603FR-0733KL
33k
YAGEO
R7
2
RC0603FR-075K1L
5.1k
YAGEO
R8, R9
1
RC0603FR-0782KL
82k
YAGEO
R10
1
RC0603FR-0720RL
20R
YAGEO
R11
2
RC0603FR-071KL
1k
YAGEO
R12, R13
2
RC0603FR-07220RL
220R
YAGEO
R14, R15

NavPoTS-Bridge design files

The KiCad project lives in the RuberDuck9/NavPoTS repository on GitHub; these links point at the commit this page was built from.

NavPoTS-Bridge: common questions

What microcontroller does the NavPoTS-Bridge use?

The NavPoTS-Bridge is built around the STM32H743ZIT6, from the STM32 family.

How big is the NavPoTS-Bridge PCB?

The NavPoTS-Bridge measures 58.9 × 58.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the NavPoTS-Bridge?

69 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the NavPoTS-Bridge design files?

From the RuberDuck9/NavPoTS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NavPoTS-Bridge design in my own project?

Yes, under the terms of its AGPL-3.0 license, which RuberDuck9 chose for the repository.

Can I test firmware for the NavPoTS-Bridge without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in NavPoTS

Similar boards