17 open source boards using the H3LIS331DLTR
Real designs built with the H3LIS331DLTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
PickleRick
icl-rocketry
100 × 37 mm196 parts6LMIT2STM32
IRIS
teletype7
50 × 100 mm160 parts4LMIT2STM32
PayloadPrototypeBoard2021
Case-Rocket-Team
51.8 × 41.7 mm71 parts2LNo license2ESP32
OneroiV1
HomeOnDuna
50 × 75 mm160 parts4LNo license1ESP32
DangerDoughnut
gavin4d
50 × 37 mm152 parts4LNo license1ESP32
Altimeter
icl-rocketry
37.5 × 25 mm80 parts4LNo license1ESP32
CanSat
budabalint
54 × 52 mm439 parts4LNo license0STM32
Wrectangle-V4
Wildcat-Rocket-Engineering-Club
100 × 140 mm137 parts2LNo license0Nordic nRF
Masters Thesis
Keaton-Ruthardt
25 × 20 mm29 parts2LMIT0AVR/Arduino
OLD-combat
mkhrenov
68.1 × 34.8 mm22 parts2LNo license0ESP32
Altimeter thin
icl-rocketry
54.5 × 19 mm80 parts4LNo license1STM32
Wrectangle-V4-old
Wildcat-Rocket-Engineering-Club
60 × 100 mm135 parts2LNo license0STM32
NavPoTS-Bridge
RuberDuck9
58.9 × 58.9 mm69 parts4LAGPL-3.00AVR/Arduino
Combat
mkhrenov
73.4 × 41.9 mm17 parts2LNo license0ESP32
Артёмитер
icl-rocketry
54.5 × 18 mm79 parts4LNo license1STM32
Board1
Wildcat-Rocket-Engineering-Club
63.5 × 63.5 mm6 parts2LNo license0ESP32
Altimeter super thin
icl-rocketry
54.5 × 18 mm79 parts4LNo license1
How designs wire the H3LIS331DLTR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the H3LIS331DLTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_IO pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF).
- The VDD pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF).
- The INT2 pin is left unconnected on 11 of 11 designs.
- The RESERVED pins have a capacitor to GND on 9 of 11 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_IOpin 1 | Connected to: 3.3V 73% · a signal 27% |
|
| NCpin 2, 3 | Connected to: Not connected 100% | — |
| GNDpin 5, 12, 13, 16 | Connected to: GND 91% | — |
| INT2pin 9 | Connected to: Not connected 100% | — |
| RESERVEDpin 10, 15 | Connected to: GND 50% · 3.3V 36% |
|
| INT1pin 11 | Connected to: Not connected 73% · a signal 27% | — |
| VDDpin 14 | Connected to: 3.3V 73% · a signal 27% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PayloadPrototypeBoard2021 by Case-Rocket-Team, PickleRick by icl-rocketry, IRIS by teletype7 and DangerDoughnut by gavin4d.
The H3LIS331DLTR in open source designs
The gallery holds 17 open source boards using the H3LIS331DLTR from 11 GitHub repositories; a typical one measures about 54.5 × 41.7 mm and carries around 80 components.
59% use four copper layers or more, and 24% carry an open source license.
The most starred is PickleRick by icl-rocketry.
Parts used alongside the H3LIS331DLTR
Microcontrollers on boards using the H3LIS331DLTR
What boards using the H3LIS331DLTR are built for
H3LIS331DLTR: common questions
Where can I find a H3LIS331DLTR reference design?
Each of the 17 boards on this page is a real design using the H3LIS331DLTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the H3LIS331DLTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the H3LIS331DLTR.
What decoupling capacitors do designs use on the H3LIS331DLTR VDD pin?
The VDD pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the H3LIS331DLTR.
How is the H3LIS331DLTR INT2 pin connected?
The INT2 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the H3LIS331DLTR.
What parts are used alongside the H3LIS331DLTR?
The MMC5983MA, ESP32-S3, BMP581, DPS368 and ICM-20608-G appear in the most repositories here.
Which microcontrollers do boards using the H3LIS331DLTR use?
Most are built on ESP32 (8), STM32 (6), AVR/Arduino (2) and Nordic nRF (1).
How big is a typical board using the H3LIS331DLTR?
The median is 54.5 × 41.7 mm, and 41% are two-layer designs.
What is the most popular open source board using the H3LIS331DLTR?
By GitHub stars, PickleRick by icl-rocketry, with 2 stars.
Can I simulate one of these boards using the H3LIS331DLTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.