20 open source boards using the MS561101BA03-50
Real designs built with the MS561101BA03-50, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Aper-Oculus
ApotheoTech
147.4 × 90 mm557 parts16LGPL-3.032AVR/Arduino
BATDATUNIT01
mlab-modules
136.2 × 85.9 mm206 parts2LGPL-3.05RP2040/RP2350
FlightComputer-SRAD-2026
vito-pp
70 × 40 mm76 parts4LNo license3STM32
ProPrj Project Ignis 2026-06-03
Shourya-x
123.2 × 67.9 mm71 parts2LNo license3ESP32
OneroiV1
HomeOnDuna
50 × 75 mm160 parts4LNo license1STM32
Drone
ifahmy
25.6 × 29.5 mm86 parts4LNo license1Picoballoon
macurs
51.3 × 20 mm25 parts2LNo license1STM32
QUT Autopilot Pixracer
Heckus
44.5 × 44.5 mm140 parts4LCustom license0RP2040/RP2350
Fledgling
Birdbrain-Aviation
90 × 40 mm132 parts4LNo license0STM32
YecnodF405
limiez1011
40 × 40 mm116 parts6LGPL-3.00STM32
YecnodF405
lmiez
40 × 40 mm116 parts6LGPL-3.00STM32
Kestrel fc
HeyPCB
40 × 40 mm93 parts6LCERN-OHL-S-2.00STM32
Horizon
ChladpavPy
38.4 × 82.8 mm92 parts4LNo license0HalfLife-Drone
Miky8745
80 × 60.6 mm44 parts4LNo license0STM32
Sparky2
ArduPilot
34.9 × 35.3 mm69 parts4LNo license244- schematic only · 58 partsSTM32
Drone v0
Prosjekt-gruppe
58 parts2LMIT5 ESP32
IrisV1
HomeOnDuna
36.7 × 75 mm79 parts2LNo license1STM32
MCU Board 0.1
thejamesrhodes
50 × 50 mm74 parts4LApache-2.01STM32
NavPoTS-Bridge
RuberDuck9
58.9 × 58.9 mm69 parts4LAGPL-3.00STM32
Sparky2
HertZhang
34.9 × 35.3 mm69 parts4LNo license0
How designs wire the MS561101BA03-50
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the MS561101BA03-50 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_1 pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 22 µF).
- The SDI/SDA_7 pin has a pull-up to 3.3V on 11 of 18 designs, most often 10 kΩ (then 4.7 kΩ).
- The PS_2 pin is tied to 3.3V on 12 of 18 designs (GND on 5).
- The SDO_6 pin is left unconnected on 11 of 18 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_1pin 1 | Connected to: 3.3V 94% |
|
| PS_2pin 2 | Connected to: 3.3V 67% · GND 28% | — |
| GND_3pin 3 | Connected to: GND 100% | — |
| SDO_6pin 6 | Connected to: Not connected 61% · a signal 33% | — |
| SDI/SDA_7pin 7 | Connected to: The microcontroller 56%, a connector 33% |
|
| SCLK_8pin 8 | Connected to: The microcontroller 56%, a connector 33% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sparky2 by ArduPilot, Aper-Oculus by ApotheoTech, BATDATUNIT01 by mlab-modules and ProPrj Project Ignis 2026-06-03 by Shourya-x.
The MS561101BA03-50 in open source designs
The gallery holds 20 open source boards using the MS561101BA03-50 from 19 GitHub repositories; a typical one measures about 50 × 44.5 mm and carries around 83 components.
75% use four copper layers or more, and 40% carry an open source license.
The most starred is Sparky2 by ArduPilot.
Parts used alongside the MS561101BA03-50
Microcontrollers on boards using the MS561101BA03-50
What boards using the MS561101BA03-50 are built for
MS561101BA03-50: common questions
Where can I find a MS561101BA03-50 reference design?
Each of the 20 boards on this page is a real design using the MS561101BA03-50. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS561101BA03-50 VDD_1 pin?
The VDD_1 pin has a decoupling capacitor on 18 of 18 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 18 open source designs using the MS561101BA03-50.
What pull-up resistor is used on the MS561101BA03-50 SDI/SDA_7 pin?
The SDI/SDA_7 pin has a pull-up to 3.3V on 11 of 18 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 18 open source designs using the MS561101BA03-50.
How is the MS561101BA03-50 PS_2 pin connected?
The PS_2 pin is tied to 3.3V on 12 of 18 designs (GND on 5). Counted from the KiCad layouts of 18 open source designs using the MS561101BA03-50.
What parts are used alongside the MS561101BA03-50?
The ICM-42688-P, STM32F405RGTx, USBLC6-2SC6, 497-11767 and AP2112K-3.3TRG1 appear in the most repositories here.
Which microcontrollers do boards using the MS561101BA03-50 use?
Most are built on STM32 (12), ESP32 (2), RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the MS561101BA03-50?
The median is 50 × 44.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the MS561101BA03-50?
By GitHub stars, Sparky2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the MS561101BA03-50 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.