Mini theremin

ryan-racer·mini-theremin

Mini theremin PCB layout, top view — open source board by ryan-racer

About the Mini theremin PCB

Mini theremin is an open source PCB design by ryan-racer, published on GitHub. It is a 2-layer board measuring 50.8 × 50.8 mm, with 17 components from 13 distinct parts.

Other key parts include the LM358. By type, the board carries 2 resistors, 1 IC, 1 transistor, 1 connector and 1 speaker.

It belongs with the audio designs in this gallery.

From the project

Mini-Theremin PCB designed in KiCad - a capacitive touch musical device using a Schmitt Trigger oscillator

A Mini-Theremin PCB designed as part of an electronics course project. A theremin is a musical instrument played without physical contact — this compact version uses a capacitive touch pad to control audio frequency through a Schmitt Trigger oscillator.

The Mini-Theremin uses a copper touch pad as one half of a capacitor. When you bring your hand near or touch the pad, you change the system's capacitance, which alters the oscillation frequency of a Schmitt Trigger oscillator built around an LM358 op-amp. The oscillator output drives a 2N7000 MOSFET that switches a speaker on and off at the…

Mini theremin, from the project README
From the project README

Main components on the Mini theremin

Mini theremin bill of materials (BOM)

17 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM358
U1
1
2N7000
Q1
1
Conn_01x02
J1
1
220 pF
Cbase1
1
10 µF
Cbulk1
2
0.1 µF
Cdec1, Cref1
1
Speaker
LS1
2
100 Ω
RLS1, Rgate1
1
200 kΩ
Rf1
2
100 kΩ
Rg1, Rpd1
1
2.2 MΩ
Rosc1
1
TOUCH_PAD
TOUCH_PAD1
2
100 kΩ
R3, R4

Mini theremin design files

The KiCad project lives in the ryan-racer/mini-theremin repository on GitHub; these links point at the commit this page was built from.

Mini theremin: common questions

How big is the Mini theremin PCB?

The Mini theremin measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mini theremin?

17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mini theremin design files?

From the ryan-racer/mini-theremin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mini theremin design in my own project?

The repository has no license, so all rights stay with ryan-racer. Use it as a reference, and ask the author before reusing the design.

Similar boards