Yugioh duel disk
RyanBran888·Yugioh-duel-disk·eeee/PCB/meowwww x3.kicad_pcb
About the Yugioh duel disk PCB
Yugioh duel disk is an open source RP2040/RP2350 PCB design by RyanBran888, published on GitHub under the MIT license. It is a 2-layer board measuring 98.5 × 92.5 mm, with 39 components from 7 distinct parts.
Its main chip is the RASPBERRY_PI_PICO, from the RP2040/RP2350 family. Other key parts include the MCP23017_SO. By type, the board carries 17 switches, 16 diodes, 2 ICs and 2 resistors.
Main components on the Yugioh duel disk
Yugioh duel disk bill of materials (BOM)
39 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | RASPBERRY_PI_PICO | RASPBERRY_PI_PICO | U4 |
| 2 | KYX3561AS | DISPLAY_KYX3561AS | DS1, DS2 |
| 1 | SW_NKK_GW12LJPCF | SW_NKK_GW12LJP | SW1 |
| 16 | SW_Push | SW_PUSH_6mm | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +8 |
| 16 | D | D_DO-35_SOD27_P3.81mm_Vertical_KathodeUp | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Yugioh duel disk design files
The KiCad project lives in the RyanBran888/Yugioh-duel-disk repository on GitHub; these links point at the commit this page was built from.
- Layouteeee/PCB/meowwww x3.kicad_pcb
- Schematiceeee/PCB/meowwww x3.kicad_sch
- BOMBOM.csv
Yugioh duel disk: common questions
What microcontroller does the Yugioh duel disk use?
The Yugioh duel disk is built around the RASPBERRY_PI_PICO, from the RP2040/RP2350 family.
How big is the Yugioh duel disk PCB?
The Yugioh duel disk measures 98.5 × 92.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Yugioh duel disk?
39 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Yugioh duel disk design files?
From the RyanBran888/Yugioh-duel-disk repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Yugioh duel disk design in my own project?
Yes, under the terms of its MIT license, which RyanBran888 chose for the repository.
Can I test firmware for the Yugioh duel disk without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k