HardLabs

Power ManagementV3 diode

ryos17·robosub-ee·gen3/PCBs/Battery_Boards/Power_ManagementV3_diode/Power_ManagementV3_diode.kicad_pcb

Power ManagementV3 diode PCB layout, top view — open source board by ryos17

About the Power ManagementV3 diode PCB

Power ManagementV3 diode is an open source PCB design by ryos17, published on GitHub. It is a 2-layer board measuring 92 × 78 mm, with 39 components from 20 distinct parts.

Other key parts include the TSX634AIPT, MCP9808_MSOP, ACS758LCB-100U-PFF-T and SRT60L100DC-R. By type, the board carries 14 resistors, 9 connectors, 9 capacitors, 4 ICs, 2 diodes and 1 transistor.

From the project

Stanford Robosub Electrical Repository

The third hardware generation, currently being designed. The proposed system architecture is shown below; the boards under PCBs/ are the work toward it. The current working vehicle is still gen2/.

- MicroBreakout/ — the main breakout board for gen 3, the successor to the gen 2 MLU breakout. References the shared parts library in ../../importedparts. - BatteryBoards/ — the gen 3 power-management / battery boards, the follow-on to the gen 2 PowerManagement boards (which had heat problems). Two design variants: - PowerManagementV3diode/ — the diode-based design; this is the lead design. -…

Power ManagementV3 diode, from the project README
From the project README

Main components on the Power ManagementV3 diode

TSX634AIPTMCP9808_MSOPACS758LCB-100U-PFF-TSRT60L100DC-R

Power ManagementV3 diode bill of materials (BOM)

39 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TSX634AIPT
AMS1117-3.3
U15
1
MCP9808_MSOP
U16
1
ACS758LCB-100U-PFF-T
Allegro MicroSystems
U17
1
SRT60L100DC-R
U18
1
L78M05ABDT-TR
Q7
2
Conn_01x02_Pin
J11, J12
1
Conn_01x02_Pin
J13
2
Conn_01x08
J14, J15
3
Conn_01x02_Pin
J16, J21, J22
1
Conn_01x04_Socket
J18
2
SS54
D15, D16
4
10uF
C12, C13, C15, C19
2
1uF
C14, C20
1
0.1uF
Samsung Electro-Mechanics
C16
1
100nF
C17
1
1µF
C18
5
10k
R27, R32, R34, R36, R41
1
20k
R28
5
0R
R29, R30, R37, R38, R39
3
47k
R31, R33, R35

Power ManagementV3 diode design files

The KiCad project lives in the ryos17/robosub-ee repository on GitHub; these links point at the commit this page was built from.

Power ManagementV3 diode: common questions

How big is the Power ManagementV3 diode PCB?

The Power ManagementV3 diode measures 92 × 78 mm, has 2 copper layers and is 1.64592 mm thick.

How many components are on the Power ManagementV3 diode?

39 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power ManagementV3 diode design files?

From the ryos17/robosub-ee repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power ManagementV3 diode design in my own project?

The repository has no license, so all rights stay with ryos17. Use it as a reference, and ask the author before reusing the design.

More boards in robosub-ee