HardLabs

Battery hot swap top

ryos17·robosub-ee·gen2/PCBs/Battery_hot_swap_top/Battery_hot_swap_top.kicad_pcb

Battery hot swap top PCB layout, top view — open source board by ryos17

About the Battery hot swap top PCB

Battery hot swap top is an open source PCB design by ryos17, published on GitHub. It is a 2-layer board measuring 35 × 44 mm, with 8 components from 6 distinct parts.

By type, the board carries 4 connectors, 2 diodes and 2 resistors.

It belongs with the power & battery designs in this gallery.

From the project

Stanford Robosub Electrical Repository

KiCad board designs for the gen 2 vehicle. Not every board here is in active use — some are older revisions, and some are experimental.

- MLUBreakoutV2/ — Main Logic Unit breakout, version 2. Routes I/O between the main compute/Teensy and the vehicle's sensors, actuators, and peripherals. This is the breakout currently flying. - PowerDistribution/ — takes battery input and distributes it to the vehicle's power rails. Currently in use.

Battery hot swap top bill of materials (BOM)

8 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
1135333
Conn_01x02_Pin
Pheonix Contact
J1, J3
2
1135333
Conn_01x02_Pin
Pheonix Contact
J2, J4
1
1SMA5931BT3
LED
onsemi
D1
1
IR26-21C_L110_TR8
LED
Everlight Electronics Co Ltd
D2
1
10K
740
YAGEO
R1
1
740
TE Connectivity Passive Product
R2

Battery hot swap top design files

The KiCad project lives in the ryos17/robosub-ee repository on GitHub; these links point at the commit this page was built from.

Battery hot swap top: common questions

How big is the Battery hot swap top PCB?

The Battery hot swap top measures 35 × 44 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Battery hot swap top?

8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Battery hot swap top design files?

From the ryos17/robosub-ee repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Battery hot swap top design in my own project?

The repository has no license, so all rights stay with ryos17. Use it as a reference, and ask the author before reusing the design.

More boards in robosub-ee

Similar boards