12EV
S-A-M-J·12EV·pcb/EV12Controller/EV12Controller_V2/EV12Controller_V2.kicad_pcb
About the 12EV PCB
12EV is an open source ESP32 PCB design by S-A-M-J, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 65 components from 42 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the SN74LV1T34DBV and NCP1117-3.3_SOT223. By type, the board carries 15 capacitors, 15 resistors, 4 ICs, 3 transistors, 3 diodes and 2 modules.
From the project
Contains all prototype info and files
CAD -> contains all needed 3d printing files in .step format.
PCB -> contains all needed info and engineering files for the custom control pcb
firmware -> contains arduino code for the esp32 on the custom control board
Main components on the 12EV
12EV bill of materials (BOM)
65 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LV1T34DBV CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U2 |
| 1 | NCP1117-3.3_SOT223 TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U3 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U4 |
| 2 | 02x08 | PinSocket_2x08_P2.54mm_Vertical_SMD | M1/M2, M2/M3 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 2 | SS8050 | SOT-23 | Q2, Q3 |
| 1 | CONN_01X03 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ESP32_PROG_CONN_2X3_2.54 esp32_prog_conn_2x3_2.54 | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | +12V_IN1, +VEM_IN1 |
| 2 | SW_Push | SW_SPST_CK_RS282G05A3 | BOOT1, RST1 |
| 1 | XH_1X2 XH_1x2 | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | EM1 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | I2C1, UART1 |
| 1 | JUMPER_3_OPEN Jumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | 01x04 | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | LIDAR1 |
| 3 | XH_1X4 01x04 | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | Motor1, Motor2, Motor3 |
| 3 | 2.54_3X2 2.54_3x2 | PinHeader_2x03_P2.54mm_Vertical | SM1, SM2, SM3 |
| 2 | 1x8_2.54 | PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left | SM1A1, SM3B1 |
| 2 | 02x03 | PinHeader_2x03_P2.54mm_Vertical_SMD | Servo1/2, Servo3/4 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WS2812B SP0503BAHT | SOT-143 | D1 |
| 1 | LED | LED_0805_2012Metric | D2 |
| 1 | 40V 2A | D_SMA | D3 |
| 1 | 22uH | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 2 | 22UF 22uF | C_0603_1608Metric | C1, C6 |
| 2 | 1UF 1uF | C_0603_1608Metric | C2, C3 |
| 2 | DNP(0.1uF) | C_0603_1608Metric | C4, C12 |
| 1 | 1000UF 22uF | C_0805_2012Metric | C5 |
| 1 | 1UF 10nF | C_0603_1608Metric | C7 |
| 3 | 47UF 47uF | CP_Elec_6.3x7.7 | C8, C9, C10 |
| 1 | 10UF 330uF(Tantalum) | C_1206_3216Metric | C11 |
| 1 | 10UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 1UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 4.7k | R_0805_2012Metric | R1 |
| 4 | 10K 10k | R_0603_1608Metric | R2, R7, R8, R9 |
| 3 | 4.7K 4.7k | R_0603_1608Metric | R3, R4, R5 |
| 2 | 1k | R_0603_1608Metric | R6, R13 |
| 2 | 0 | R_0603_1608Metric | R10, R12 |
| 1 | 150R | R_0603_1608Metric | R11 |
| 1 | 10k | R_0603_1608Metric | R14 |
| 1 | 3.24k | R_0805_2012Metric | R15 |
12EV design files
The KiCad project lives in the S-A-M-J/12EV repository on GitHub; these links point at the commit this page was built from.
12EV: common questions
What microcontroller does the 12EV use?
The 12EV is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the 12EV PCB?
The 12EV measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 12EV?
65 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12EV design files?
From the S-A-M-J/12EV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 12EV design in my own project?
The repository has no license, so all rights stay with S-A-M-J. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 12EV without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: EV12Controller
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k