Rp2040 pmod
s59mz·rp2040_pmod·kicad/rp2040_pmod.kicad_pcb
About the Rp2040 pmod PCB
Rp2040 pmod is an open source RP2040/RP2350 PCB design by s59mz, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 40 mm, with 27 components from 16 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q32JVZP and TLV74333. By type, the board carries 11 capacitors, 7 resistors, 3 ICs, 3 connectors, 1 crystal and 1 switch.
From the project
Repository for the rp2040_pmod board from controlpaths devices.
The RP2040 PMOD is a PMOD-compatible board based on the Raspberry PI microcontroller, the RP2040
The board has its own 3v3 LDO regulator, and the 3v3 pins of the PMOD connector are not connected.
On the /examples folder you will find examples to program in this board.
- pico-uart-bridge: Uses the RP2040 PMOD to generate two different UART interfaces in the PMOD PINS 5/6 and 11/12.

Main components on the Rp2040 pmod
Rp2040 pmod bill of materials (BOM)
27 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q32JVZP | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | TLV74333 | SOT-23-5 | U3 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 5 | 100n | C_0603_1608Metric | C1, C4, C7, C8, C9 |
| 2 | 15p | C_0603_1608Metric | C2, C3 |
| 4 | 1u | C_0603_1608Metric | C5, C6, C10, C11 |
| 2 | 27 | R_0603_1608Metric | R1, R2 |
| 2 | 1k | R_0603_1608Metric | R3, R5 |
| 2 | 10k | R_0603_1608Metric | R4, R7 |
| 1 | 4k7 | R_0603_1608Metric | R6 |
Rp2040 pmod design files
The KiCad project lives in the s59mz/rp2040_pmod repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/rp2040_pmod.kicad_pcb
- Schematickicad/rp2040_pmod.kicad_sch
Rp2040 pmod: common questions
What microcontroller does the Rp2040 pmod use?
The Rp2040 pmod is built around the RP2040, from the RP2040/RP2350 family.
How big is the Rp2040 pmod PCB?
The Rp2040 pmod measures 20 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rp2040 pmod?
27 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rp2040 pmod design files?
From the s59mz/rp2040_pmod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rp2040 pmod design in my own project?
Yes, under the terms of its MIT license, which s59mz chose for the repository.
Can I test firmware for the Rp2040 pmod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k