SlimReceiver
Saand1338·Andale-Adapter·Slim Receiver/KiCad Project/SlimReceiver/SlimReceiver.kicad_pcb
About the SlimReceiver PCB
SlimReceiver is an open source PCB design by Saand1338, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 27.7 × 89.8 mm, with 7 components from 5 distinct parts.
By type, the board carries 5 connectors and 2 test points.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
The Andale Adapter Project is a roughly Wii Remote sized adapter for Wii Guitar Hero controllers powered by a Pi Pico/Pico W running Santroller firmware.
The Andale Adapter Project is a Wii Remote–sized adapter for Wii Guitar Hero Controllers, powered by a Raspberry Pi Pico/Pico W running Santroller firmware. This project, through the Santroller firmware, enables these controllers to function on PC/Xbox/PlayStation platforms through USB connectivity, or though Bluetooth via custom recievers also powered by a Raspberry Pi Pico W running Santroller firmware. The circuit boards have been designed with hand assembly in mind, and requires the soldering of both through-hole components and surface mount devices (SMD). The use of SMD components makes…

SlimReceiver bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical_Low_Profile | J1, J2 |
| 1 | USB_A | USB_A_CNCTech_1001-011-01101_Horizontal_NoModel | J3 |
| 1 | USB_A | USB_A_CNCTech_1001-011-01101_Horizontal | J4 |
| 1 | USB_A | USB_A_Receptacle_GCT_USB1046_Model | J5 |
| 2 | TestPoint | MM_0926-1-15-20-75-14-11-0 | TP2, TP3 |
SlimReceiver design files
The KiCad project lives in the Saand1338/Andale-Adapter repository on GitHub; these links point at the commit this page was built from.
SlimReceiver: common questions
How big is the SlimReceiver PCB?
The SlimReceiver measures 27.7 × 89.8 mm, has 2 copper layers and is 1.1 mm thick.
How many components are on the SlimReceiver?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the SlimReceiver design files?
From the Saand1338/Andale-Adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SlimReceiver design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Saand1338 chose for the repository.
More boards in Andale-Adapter
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956