BatteryBoard
Saand1338·Andale-Adapter·Andale Adapter/KiCad Projects/BatteryBoard/BatteryBoard.kicad_pcb
About the BatteryBoard PCB
BatteryBoard is an open source PCB design by Saand1338, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 30.3 × 101.9 mm, with 6 components from 5 distinct parts.
By type, the board carries 4 battery holders, 1 connector and 1 switch.
It belongs with the audio, power & battery and iot & wireless designs in this gallery.
From the project
The Andale Adapter Project is a roughly Wii Remote sized adapter for Wii Guitar Hero controllers powered by a Pi Pico/Pico W running Santroller firmware.
The Andale Adapter Project is a Wii Remote–sized adapter for Wii Guitar Hero Controllers, powered by a Raspberry Pi Pico/Pico W running Santroller firmware. This project, through the Santroller firmware, enables these controllers to function on PC/Xbox/PlayStation platforms through USB connectivity, or though Bluetooth via custom recievers also powered by a Raspberry Pi Pico W running Santroller firmware. The circuit boards have been designed with hand assembly in mind, and requires the soldering of both through-hole components and surface mount devices (SMD). The use of SMD components makes…

BatteryBoard bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical-Inverted | J1 |
| 1 | 595 | BAT_595 | BT1 |
| 2 | 628 | BAT_628 | BT2, BT4 |
| 1 | 595 | BAT_595_NoBatt | BT3 |
| 1 | AS11AH | AS11AH | SW1 |
BatteryBoard design files
The KiCad project lives in the Saand1338/Andale-Adapter repository on GitHub; these links point at the commit this page was built from.
BatteryBoard: common questions
How big is the BatteryBoard PCB?
The BatteryBoard measures 30.3 × 101.9 mm, has 2 copper layers and is 1.1 mm thick.
How many components are on the BatteryBoard?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the BatteryBoard design files?
From the Saand1338/Andale-Adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BatteryBoard design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Saand1338 chose for the repository.
More boards in Andale-Adapter
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k