Hackerpad

SabyrAlymbekov·Hackerpad·pcb/pcb.kicad_pcb

Hackerpad PCB layout, top view — open source RP2040/RP2350 board by SabyrAlymbekov

About the Hackerpad PCB

Hackerpad is an open source RP2040/RP2350 PCB design by SabyrAlymbekov, published on GitHub under the MIT license. It is a 2-layer board measuring 97.6 × 57.2 mm, with 16 components from 6 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 8 diodes, 6 switches, 1 IC and 1 connector.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

This is a custom mechanical macropad (Hackerpad), designed entirely from scratch (my first time btw).

This is a custom mechanical macropad (Hackerpad), designed entirely from scratch (my first time btw).

I wanted cool looking macropad for Competitive programming, so I made this one. The design is inspired by cyberpunk aesthetics and orpheuspad design. The device features 5 mechanical keys, a rotary encoder for multimedia control, an OLED display, and RGB lighting.

Hackerpad, from the project README
From the project README

Main components on the Hackerpad

Hackerpad bill of materials (BOM)

16 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
Conn_01x04
J1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
1
RotaryEncoder_Switch
SW6
2
SK6812
D1, D2
6
1N4148
D3, D4, D5, D6, D7, D8

Hackerpad design files

The KiCad project lives in the SabyrAlymbekov/Hackerpad repository on GitHub; these links point at the commit this page was built from.

Hackerpad: common questions

What microcontroller does the Hackerpad use?

The Hackerpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hackerpad PCB?

The Hackerpad measures 97.6 × 57.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackerpad?

16 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackerpad design files?

From the SabyrAlymbekov/Hackerpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackerpad design in my own project?

Yes, under the terms of its MIT license, which SabyrAlymbekov chose for the repository.

Can I test firmware for the Hackerpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards