KICAD-STM32-GPS-Tracker-Project
Saie12·KICAD-STM32-GPS-Tracker-Project
About the KICAD-STM32-GPS-Tracker-Project PCB
KICAD-STM32-GPS-Tracker-Project is an open source STM32 PCB design by Saie12, published on GitHub. It is a 4-layer board measuring 43.5 × 58.5 mm, with 55 components from 35 distinct parts.
Its main chip is the STM32F030C8TX, from the STM32 family. Other key parts include the SIM808, TPS5430DDA and SMF05CT1G. By type, the board carries 19 capacitors, 15 resistors, 5 diodes, 4 ICs, 4 connectors and 2 switches.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
A professional-grade GPS tracking system built around the STM32F030C8 microcontroller with SIM808 GSM/GPRS/GPS module. This project demonstrates full embedded systems development: PCB design, firmware architecture, and real-time data processing.
A professional-grade GPS tracking system built around the STM32F030C8 microcontroller with SIM808 GSM/GPRS/GPS module. This project demonstrates full embedded systems development: PCB design, firmware architecture, and real-time data processing.
Status: ✅ Hardware design complete | ✅ Firmware (7 phases) complete | ✅ Production-ready code
- GPS Tracking: Real-time location acquisition via SIM808 onboard GPS - GPRS Upload: Transmits GPS coordinates to remote server over cellular network - Power Management: Intelligent battery monitoring and sleep modes - Hardware-Free Testing: Mock SIM808…
Main components on the KICAD-STM32-GPS-Tracker-Project
KICAD-STM32-GPS-Tracker-Project bill of materials (BOM)
55 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SIM808 | XCVR_SIM808 | U1 |
| 1 | TPS5430DDA | VREG_LM5017MR_NOPB | U2 |
| 1 | SMF05CT1G | SOT65P210X110-6N | U3 |
| 1 | STM32F030C8TX STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | AO3407A | SOT95P280X125-3N | Q1 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LEFT HEADER PINS | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | 693010020611 | 693010020611 | J3 |
| 1 | RIGHT HEADER PINS | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Fuse 2.5A | Fuse_0402_1005Metric | F1 |
| 2 | U.FL-R-SMT-1 | U.FL-R-SMT-1 | GPS1, GSM1 |
| 2 | SW_Push | SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 1 | D_Zener | D_0805_2012Metric | D1 |
| 1 | B340 | D_SMC | D2 |
| 3 | LED | LED_0201_0603Metric | D3, D4, D5 |
| 1 | 15UH 15uH | L_10.4x10.4_H4.8 | L1 |
| 1 | 100U 100u | C_1206_3216Metric | C1 |
| 1 | 33P 33p | C_0402_1005Metric | C2 |
| 2 | 10P 10p | C_0402_1005Metric | C3, C11 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10U 10u | C_0805_2012Metric | C4 |
| 2 | 4U7 4u7 | C_0201_0603Metric | C5, C15 |
| 1 | 22P 22p | C_0402_1005Metric | C6 |
| 1 | 10N 10n | C_0201_0603Metric | C7 |
| 1 | 1u | C_0402_1005Metric | C8 |
| 1 | 220U 220u | CP_EIA-7343-15_Kemet-W | C9 |
| 2 | 30P 30p | C_0402_1005Metric | C10, C13 |
| 6 | 100N 100n | C_0402_1005Metric | C12, C14, C16, C17, C18, C19 |
| 1 | 4K7 | R_0402_1005Metric | R1 |
| 6 | 10K | R_0402_1005Metric | R2, R3, R4, R10, R14, R15 |
| 1 | 8K2 | R_0805_2012Metric | R5 |
| 4 | 1K5 | R_0805_2012Metric | R6, R8, R12, R13 |
| 1 | 2K7 | R_0805_2012Metric | R7 |
| 1 | 100K | R_0201_0603Metric | R9 |
| 1 | 1K | R_0603_1608Metric | R11 |
KICAD-STM32-GPS-Tracker-Project design files
The KiCad project lives in the Saie12/KICAD-STM32-GPS-Tracker-Project repository on GitHub; these links point at the commit this page was built from.
KICAD-STM32-GPS-Tracker-Project: common questions
What microcontroller does the KICAD-STM32-GPS-Tracker-Project use?
The KICAD-STM32-GPS-Tracker-Project is built around the STM32F030C8TX, from the STM32 family.
How big is the KICAD-STM32-GPS-Tracker-Project PCB?
The KICAD-STM32-GPS-Tracker-Project measures 43.5 × 58.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the KICAD-STM32-GPS-Tracker-Project?
55 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KICAD-STM32-GPS-Tracker-Project design files?
From the Saie12/KICAD-STM32-GPS-Tracker-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KICAD-STM32-GPS-Tracker-Project design in my own project?
The repository has no license, so all rights stay with Saie12. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KICAD-STM32-GPS-Tracker-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k