Ctd base
About the Ctd base PCB
Ctd base is an open source PCB design by Sailowtech-draft, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 8 components from 4 distinct parts.
By type, the board carries 7 connectors and 1 resistor.
It belongs with the sensors designs in this gallery.
Ctd base bill of materials (BOM)
8 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x02_Male | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1, J8 |
| 4 | Conn_01x04_Female | JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J2, J3, J4, J5 |
| 1 | Conn_01x03_Female | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J6 |
| 1 | 4.7kOhm | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
Ctd base design files
The KiCad project lives in the Sailowtech-draft/Sailowtech-CTD repository on GitHub; these links point at the commit this page was built from.
Ctd base: common questions
How big is the Ctd base PCB?
The Ctd base measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ctd base?
8 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ctd base design files?
From the Sailowtech-draft/Sailowtech-CTD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ctd base design in my own project?
The repository has no license, so all rights stay with Sailowtech-draft. Use it as a reference, and ask the author before reusing the design.
More boards in Sailowtech-CTD
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956