KOTH V2

Salted-Peanuts·KOTH-Timer·PCB/v0.2-tested/v0.2_KiCad_files/KOTH_V2.kicad_pcb

KOTH V2 PCB layout, top view — open source AVR/Arduino board by Salted-Peanuts

About the KOTH V2 PCB

KOTH V2 is an open source AVR/Arduino PCB design by Salted-Peanuts, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 100 mm, with 41 components from 23 distinct parts.

Its main chip is the ARDUINO_NANO_ESP32, from the AVR/Arduino family. Other key parts include the 5V_STEP_UP. By type, the board carries 13 resistors, 8 capacitors, 7 diodes, 4 switches, 1 IC and 1 module.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

DIY Arduino Nano ESP32 King of the Hill timer for Nerf, foam flinging, skirmish games, and objective-based events. Includes build guide, firmware, BOM, schematic, and phone referee UI.

This folder contains the second PCB revision for the KOTH Timer.

Manufactured, assembled, and tested with no known faults.

PCB v0.2 is the current recommended PCB revision for new builds.

PCB v0.2 was redesigned after testing PCB v0.1.

The v0.1 board was functionally usable through the web UI, but some TM1637 displays showed reliability issues.

PCB v0.2 improves the design with better attention to:

Main components on the KOTH V2

KOTH V2 bill of materials (BOM)

41 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
5V_STEP_UP
5v_Step_Up
U1
1
ARDUINO_NANO_ESP32
Arduino_Nano_ESP32
A1
1
Conn_01x10_Pin
J1
1
18650_CELL
18650_Cell
BT1
1
2.5-3A_FUSE
1-2A_Fuse
F1
1
Rocker_Switch
SW1
1
Push_Switch (Team_A)
SW2
1
Push_Switch (Team_B)
SW3
1
SW_Push
SW4
2
4_Digit_DIsplay (Team_A)
TM1637-A1, TM1637-A2
2
4_Digit_DIsplay (Team_B)
TM1637-B1, TM1637-B2
1
LED (Team_A)
D1
1
LED (Team_B)
D2
1
LED_RED
D3
1
LED_YELLOW
D4
3
LED_GREEN
D5, D6, D7
1
470UF_E_CAP
470uf_E_Cap
C1
1
0.1UF_C_CAP
0.1uf_C_Cap
C2
4
0.1uf_C_Cap
C3, C4, C5, C6
2
100uf_E_Cap
C7, C8
Show 3 more
QtyPartRefs
2
100K
R1, R2
7
220R
R3, R4, R5, R6, R7, R8, R9
4
100R
R10, R11, R12, R13

KOTH V2 design files

The KiCad project lives in the Salted-Peanuts/KOTH-Timer repository on GitHub; these links point at the commit this page was built from.

KOTH V2: common questions

What microcontroller does the KOTH V2 use?

The KOTH V2 is built around the ARDUINO_NANO_ESP32, from the AVR/Arduino family.

How big is the KOTH V2 PCB?

The KOTH V2 measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the KOTH V2?

41 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KOTH V2 design files?

From the Salted-Peanuts/KOTH-Timer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KOTH V2 design in my own project?

Yes, under the terms of its MIT license, which Salted-Peanuts chose for the repository.

Can I test firmware for the KOTH V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KOTH-Timer

Similar boards