WIRED

samalsubrat·arion-aryabhatta·kicad source/WiredPcb/WIRED.kicad_pcb

WIRED PCB layout, top view — open source RP2040/RP2350 board by samalsubrat

About the WIRED PCB

WIRED is an open source RP2040/RP2350 PCB design by samalsubrat, published on GitHub. It is a 2-layer board measuring 76.3 × 125.2 mm, with 91 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the XC6210B332MR+AC0-G and W25Q16JVUXIQ. By type, the board carries 21 switches, 19 diodes, 18 LEDs, 14 capacitors, 12 resistors and 3 ICs.

Main components on the WIRED

XC6210B332MR+AC0-GRP2040W25Q16JVUXIQ

WIRED bill of materials (BOM)

91 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6210B332MR+AC0-G
XC6210B332MR-G
U1
1
RP2040
U2
U2
1
W25Q16JVUXIQ
U3
U3
1
CRYSTAL+AF8-GND24
Crystal_GND24
Y1
1
Conn_01x04_Pin
J3
1
CONN+AF8-01X06+AF8-SOCKET
Conn_01x06_Socket
J4
1
Polyfuse
F1
15
KEYSW
SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW8 +7
2
KEYSW
SW7, SW14
1
KEYSW
SW15
2
SW_Push
SW17, SW18
1
ROTARY+AF8-ENCODER+AF8-SWITCH
Rotary_Encoder_Switch
SW19
18
YS-SK6812MINI-E
LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11 +10
19
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +11
4
1µ
C1, C2, C3, C4
2
15p
C5, C8
8
100n
C6, C7, C9, C10, C11, C12, C13, C14
4
0k
R1, R4, R12, R13
3
10k
R2, R10, R11
2
1k
R3, R8
Show 2 more
QtyPartRefs
2
27
R6, R7
1
5.1K
5.1k
R9

WIRED design files

The KiCad project lives in the samalsubrat/arion-aryabhatta repository on GitHub; these links point at the commit this page was built from.

WIRED: common questions

What microcontroller does the WIRED use?

The WIRED is built around the RP2040, from the RP2040/RP2350 family.

How big is the WIRED PCB?

The WIRED measures 76.3 × 125.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the WIRED?

91 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the WIRED design files?

From the samalsubrat/arion-aryabhatta repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the WIRED design in my own project?

The repository has no license, so all rights stay with samalsubrat. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the WIRED without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in arion-aryabhatta

Similar boards