Camper pir switch
samba09·camper-pir-switch·kicad/pir_camper_am312/pir_camper_am312.kicad_pcb
About the Camper pir switch PCB
Camper pir switch is an open source PCB design by samba09, published on GitHub under the MIT license. It is a 2-layer board measuring 48 × 28 mm, with 26 components from 23 distinct parts.
Other key parts include the AQY212S, AM312 module and TPS70933DBV. By type, the board carries 8 resistors, 5 capacitors, 4 transistors, 3 ICs, 2 connectors and 2 diodes.
It belongs with the sensors designs in this gallery.
From the project
PIR motion switch for Revotion NODE Ambient (AM312, PhotoMOS, KiCad)
A small motion sensor board that switches the camper light through a Revotion NODE Ambient switch input. Motion closes a potential-free contact (AQY212 PhotoMOS) for an adjustable hold time of about 2 minutes, and a light sensor keeps it from triggering in daylight. It runs from the camper's 12 V supply and draws about 0.1 mA while idle.
The HC-SR505 board is the first version; it was built and measured (hold time about 3 min). The AM312 boards replace it and add the light sensor. The PDFs (also as HTML) contain the full build guides: schematic, perfboard layout with every solder path, parts…
Main components on the Camper pir switch
Camper pir switch bill of materials (BOM)
26 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AQY212S | SO-4_4.4x4.3mm_P2.54mm | U1 |
| 1 | AM312 module | AM312_Module_Socket | U2 |
| 1 | TPS70933DBV | SOT-23-5 | U3 |
| 1 | MMBTA14 | SOT-23 | Q1 |
| 2 | BC847C | SOT-23 | Q2, Q4 |
| 1 | BC857C | SOT-23 | Q3 |
| 1 | 12V GND SW_A SW_B | PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J1 |
| 1 | LDR GL5528 (optional) | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | 50K 50k | Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | 1M | Potentiometer_Bourns_3314G_Vertical | RV2 |
| 2 | 1N4148W | D_SOD-123 | D1, D2 |
| 1 | 330µF 6.3V | CP_Elec_6.3x5.4 | C1 |
| 1 | 1µF 25V | C_0805_2012Metric | C2 |
| 1 | 2.2µF 10V | C_0805_2012Metric | C3 |
| 2 | 100NF 100nF | C_0805_2012Metric | C4, C5 |
| 1 | 470 | R_0805_2012Metric | R1 |
| 1 | 22K 22k | R_0805_2012Metric | R2 |
| 1 | 2.2K 2.2k | R_0805_2012Metric | R3 |
| 1 | 1.8K 1.8k | R_0805_2012Metric | R4 |
| 1 | 10K 10k | R_0805_2012Metric | R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47K 47k | R_0805_2012Metric | R6 |
| 1 | 100K 100k | R_0805_2012Metric | R7 |
| 1 | 1M | R_0805_2012Metric | R8 |
Camper pir switch design files
The KiCad project lives in the samba09/camper-pir-switch repository on GitHub; these links point at the commit this page was built from.
Camper pir switch: common questions
How big is the Camper pir switch PCB?
The Camper pir switch measures 48 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Camper pir switch?
26 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Camper pir switch design files?
From the samba09/camper-pir-switch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Camper pir switch design in my own project?
Yes, under the terms of its MIT license, which samba09 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956