TermoInteligente
SamGonzalez1708·TermoInteligente·PCB/Librerias PCB/TermoINteligente.kicad_pcb
About the TermoInteligente PCB
TermoInteligente is an open source ESP32 PCB design by SamGonzalez1708, published on GitHub. It is a 2-layer board measuring 70 × 75 mm, with 5 components from 5 distinct parts.
Its main chip is the DEVKIT_V1_ESP32-WROOM-32, from the ESP32 family. By type, the board carries 2 connectors, 1 IC, 1 buzzer and 1 resistor.
From the project
Dispositivo capaz de leer la temperatura e indicar mediante una alerta sonora una temperatura muy caliente o fria
Main components on the TermoInteligente
TermoInteligente bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DEVKIT_V1_ESP32-WROOM-32 | MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
| 1 | LCD 16x2 | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | DS18B20 | PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 4.7kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
TermoInteligente design files
The KiCad project lives in the SamGonzalez1708/TermoInteligente repository on GitHub; these links point at the commit this page was built from.
TermoInteligente: common questions
What microcontroller does the TermoInteligente use?
The TermoInteligente is built around the DEVKIT_V1_ESP32-WROOM-32, from the ESP32 family.
How big is the TermoInteligente PCB?
The TermoInteligente measures 70 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TermoInteligente?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the TermoInteligente design files?
From the SamGonzalez1708/TermoInteligente repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TermoInteligente design in my own project?
The repository has no license, so all rights stay with SamGonzalez1708. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TermoInteligente without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k