Micropython Demoboard
sandman72·Micropython_Demoboard·Hardware/MicroPython_DemoBoard.kicad_pcb
About the Micropython Demoboard PCB
Micropython Demoboard is an open source RP2040/RP2350 PCB design by sandman72, published on GitHub under the MIT license. It is a 2-layer board measuring 95.3 × 78.1 mm, with 17 components from 17 distinct parts.
Its main chip is the Raspberry Pi Pico, from the RP2040/RP2350 family. By type, the board carries 6 switches, 4 connectors, 3 resistors, 1 module, 1 buzzer and 1 diode.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
This is a little demo board with sensors, leds and display helping in teaching Micropython.
There is three areas that the workshops cover:
1. Building the hardware itself. Good for beginners and people that already know programming, but have no or little expirience with real hardware 2. Learning to program hardware with MicroPython on the hardware itself. 3. Have fun with the included games. ;)
This repo contains all necessary files for our MicroPython Hardware Workshop at the Attraktor e.V. Makerspace in Hamburg, Germany: Attraktor MicroPython Workshop

Main components on the Micropython Demoboard
Micropython Demoboard bill of materials (BOM)
17 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Raspberry Pi Pico | Raspberry_Pi_Pico_W_SC0918 | A1 |
| 1 | WS2812 RGB LEDs GP28 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | BMP280 Sensor SPI | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | OLED Display I2C | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Erweiterung | PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | Buzzer GP10 | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Poti 10k ADC0 | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | Left GP12 | SW_PUSH_6mm_H7.3mm | SW1 |
| 1 | Up GP11 | SW_PUSH_6mm_H7.3mm | SW2 |
| 1 | Center GP15 | SW_PUSH_6mm_H7.3mm | SW3 |
| 1 | Down GP14 | SW_PUSH_6mm_H7.3mm | SW4 |
| 1 | Right GP13 | SW_PUSH_6mm_H7.3mm | SW5 |
| 1 | RESET | SW_PUSH_6mm_H7.3mm | SW6 |
| 1 | LED GP22 | LED_D5.0mm | D1 |
| 1 | LDR ADC1 | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Micropython Demoboard design files
The KiCad project lives in the sandman72/Micropython_Demoboard repository on GitHub; these links point at the commit this page was built from.
Micropython Demoboard: common questions
What microcontroller does the Micropython Demoboard use?
The Micropython Demoboard is built around the Raspberry Pi Pico, from the RP2040/RP2350 family.
How big is the Micropython Demoboard PCB?
The Micropython Demoboard measures 95.3 × 78.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Micropython Demoboard?
17 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Micropython Demoboard design files?
From the sandman72/Micropython_Demoboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Micropython Demoboard design in my own project?
Yes, under the terms of its MIT license, which sandman72 chose for the repository.
Can I test firmware for the Micropython Demoboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k