Omega-D

Sappling-Chores·Omega-D·PCB/Kicad/Omega-D.kicad_pcb

Omega-D PCB layout, top view — open source RP2040/RP2350 board by Sappling-Chores

About the Omega-D PCB

Omega-D is an open source RP2040/RP2350 PCB design by Sappling-Chores, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 338.5 × 122.5 mm, with 262 components from 44 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the SN74AHCT125N. By type, the board carries 89 switches, 85 diodes, 84 LEDs, 1 IC and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

It uses Raspberry pi pico as MCU. It is fully mechanical + hotswappable. It is Gasket mount for long typing sessons. Each key has its own sk6812mini e led. It has a rotary encoder whose switch is connected to switch matrix. It has multiple modes including normal 84 key and macros

It uses Raspberry pi pico as MCU. It is fully mechanical + hotswappable. It is Gasket mount for long typing sessons. Each key has its own sk6812mini e led. It has a rotary encoder whose switch is connected to switch matrix. It has multiple modes including normal 84 key and macros layers. * It has a passive buzzer which gives different notes on different macros.

Omega-D, from the project README
From the project README

Main components on the Omega-D

Omega-D bill of materials (BOM)

262 components, 44 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74AHCT125N
U1
1
RaspberryPi_Pico
A2
2
~
Pad1, Pad2
1
MX_stab
S1
1
MX_stab
S2
2
MX_stab
S3, S4
1
SW_Push_45deg1
SW0
1
SW_Push_45deg2
SW1
1
SW_Push_45deg3
SW2
50
SW_Push_45deg
SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW13 +42
1
SW_Push_45deg10
SW10
1
SW_Push_45deg11
SW11
1
SW_Push_45deg12
SW12
1
SW_Push_45deg22
SW22
1
SW_Push_45deg29
SW29
1
SW_Push_45deg30
SW30
1
SW_Push_45deg
SW31
1
SW_Push_45deg33
SW33
1
SW_Push_45deg45
SW45
1
SW_Push_45deg46
SW46
Show 24 more
QtyPartRefs
1
SW_Push_45deg47
SW47
1
SW_Push_45deg57
SW57
1
SW_Push_45deg58
SW58
1
SW_Push_45deg59
SW59
1
SW_Push_45deg60
SW60
1
SW_Push_45deg61
SW61
1
SW_Push_45deg66
SW66
1
SW_Push_45deg67
SW67
1
SW_Push_45deg68
SW68
1
SW_Push_45deg72
SW72
1
SW_Push_45deg73
SW73
1
SW_Push_45deg75
SW75
1
SW_Push_45deg76
SW76
1
SW_Push_45deg77
SW77
1
SW_Push_45deg78
SW78
1
SW_Push_45deg79
SW79
1
SW_Push_45deg80
SW80
1
SW_Push_45deg
SW81
1
SW_Push_45deg82
SW82
1
SW_Push_45deg83
SW83
1
SW_Push_45deg
SW84
1
RotaryEncoder_Switch
SW403
84
SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +76
85
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +77

Omega-D design files

The KiCad project lives in the Sappling-Chores/Omega-D repository on GitHub; these links point at the commit this page was built from.

Omega-D: common questions

What microcontroller does the Omega-D use?

The Omega-D is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Omega-D PCB?

The Omega-D measures 338.5 × 122.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Omega-D?

262 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Omega-D design files?

From the Sappling-Chores/Omega-D repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Omega-D design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Omega-D without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards