AquaMind

savergiggio·AquaMind·pcb/kicad/AquaMind.kicad_pcb

AquaMind PCB layout, top view — open source ESP32 board by savergiggio

About the AquaMind PCB

AquaMind is an open source ESP32 PCB design by savergiggio, published on GitHub under the MIT license. It is a 2-layer board measuring 109.7 × 53.5 mm, with 14 components from 12 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI_SMD, from the ESP32 family. By type, the board carries 4 resistors and 1 IC.

It belongs with the sensors designs in this gallery.

From the project

Open-source smart aquarium monitoring & control system powered by ESP32, Raspberry Pi and AI. 🐟 Real-time sensors, live camera, automation, alerts, web dashboard & mobile app.

A big thanks to PCBWay for supporting the project and taking care of the PCB fabrication for AquaMind. They manufactured the AquaMind board directly from the Gerber files and production data available in pcb/kicad/. I was really happy with how the board turned out. The overall finish was very clean, the silkscreen was sharp, and the drilling and routing looked precise.

AquaMind, from the project README
From the project README

Main components on the AquaMind

AquaMind bill of materials (BOM)

14 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3_SUPERMINI_SMD
U1
1
AUX1
AUX1
1
AUX2
AUX2
1
AUX3
AUX3
1
AUX4
AUX4
1
DISPLAY
DISPLAY1
1
LVL
LVL1
1
PH
PH1
1
TDS
TDS1
1
TEMP
TEMP1
2
1K
R1K1, R21K1
2
2K
R32K1, R42K1

AquaMind design files

The KiCad project lives in the savergiggio/AquaMind repository on GitHub; these links point at the commit this page was built from.

AquaMind: common questions

What microcontroller does the AquaMind use?

The AquaMind is built around the ESP32-C3_SUPERMINI_SMD, from the ESP32 family.

How big is the AquaMind PCB?

The AquaMind measures 109.7 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AquaMind?

14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AquaMind design files?

From the savergiggio/AquaMind repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AquaMind design in my own project?

Yes, under the terms of its MIT license, which savergiggio chose for the repository.

Can I test firmware for the AquaMind without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards