Early-Warning-System
Savitron-dev·Early-Warning-System
About the Early-Warning-System PCB
Early-Warning-System is an open source ESP32 PCB design by Savitron-dev, published on GitHub. It is a board, with 8 components from 8 distinct parts.
Its main chip is the ESP32 Controller, from the ESP32 family. Other key parts include the MCP2515-xSO. By type, the board carries 7 connectors and 1 IC.
It belongs with the rf & radio and audio designs in this gallery.
From the project
Everyday drivers and vulnerable pedestrians lack a proactive safety network, leaving them exposed to unintentional traffic violations and unpredictable collisions because current safety infrastructure is entirely reactive and fails to provide real-time, localized warnings about approaching reckless vehicles
Everyday drivers and vulnerable pedestrians lack a proactive safety network, leaving them exposed to unintentional traffic violations and unpredictable collisions. Existing safety infrastructure is entirely reactive, offering a 0-second predictive warning window.
This repository contains the 3D CAD mechanical enclosure designs, exploded assembly models, KiCad hardware schematics, and prototype specifications for the Controlled Traffic System - Vehicle Unit.
Main components on the Early-Warning-System
Early-Warning-System bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | ESP32 Controller | J1 | |
| 1 | RTK GNSS Receiver | J3 | |
| 1 | OBD-II Vehicle Connector | J4 | |
| 1 | Camera Module Interface | J5 | |
| 1 | Protected Power Module | J6 | |
| 1 | SN65HVD230 CAN Transceiver | J7 | |
| 1 | Cellular Module Interface | J8 |
Early-Warning-System design files
The KiCad project lives in the Savitron-dev/Early-Warning-System repository on GitHub; these links point at the commit this page was built from.
Early-Warning-System: common questions
What microcontroller does the Early-Warning-System use?
The Early-Warning-System is built around the ESP32 Controller, from the ESP32 family.
How many components are on the Early-Warning-System?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Early-Warning-System design files?
From the Savitron-dev/Early-Warning-System repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Early-Warning-System design in my own project?
The repository has no license, so all rights stay with Savitron-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Early-Warning-System without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k