HardLabs

BSPD 5

SCFormulaElectric·USC-Electrical-Systems·2024-25/Boards/BSPD/BSPD_5.kicad_pcb

BSPD 5 PCB layout, top view — open source STM32 board by SCFormulaElectric
Simulate this board

About the BSPD 5 PCB

BSPD 5 is an open source STM32 PCB design by SCFormulaElectric, published on GitHub. It is a 2-layer board measuring 40.1 × 54.3 mm, with 24 components from 20 distinct parts.

Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the BQ79616PAPRQ1, TPS563300, PBQ79600PWQ1, AMS1117-3.3 and SN65HVD230DR. By type, the board carries 12 resistors, 7 ICs, 3 capacitors, 1 connector and 1 diode.

From the project

This folder contains all individual boards and the PCBs and schematics associated with them.

This folder contains all individual boards and the PCBs and schematics associated with them.

- BusBarboard - Dashbox - Fabassembly - Powerboard - Precharge - Relayboard - TSAL - VIL - randomshitboard - DAQ_sensor

Main components on the BSPD 5

BQ79616PAPRQ1TPS563300PBQ79600PWQ1AMS1117-3.3SN65HVD230DRSTM32F405RGTXLM397

BSPD 5 bill of materials (BOM)

24 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ79616PAPRQ1
LM358
U1
1
TPS563300
LM358
U2
1
PBQ79600PWQ1
LM358
U3
1
AMS1117-3.3
LM358
U4
1
SN65HVD230DR
HEF4071B (OR)
U5
1
STM32F405RGTX
LM4040LP-5
U6
1
LM397
HEF4011B (NAND)
U7
1
043045-0612
J1
1
SM91502ALE
1N4148
D1
1
4.7UF
0.1u
C1
1
1UF
0.1u
C2
1
1UF
12u
C4
1
1k
R1
1
2.7k
R2
1
5k
R3
1
0603WAF604JT5E
50k
R4
1
0603WAF604JT5E
47k
R5
1
47k
R6
2
10k
R7, R8
4
T93YA103KT20
R9, R10, R11, R12

BSPD 5 design files

The KiCad project lives in the SCFormulaElectric/USC-Electrical-Systems repository on GitHub; these links point at the commit this page was built from.

BSPD 5: common questions

What microcontroller does the BSPD 5 use?

The BSPD 5 is built around the STM32F405RGTX, from the STM32 family.

How big is the BSPD 5 PCB?

The BSPD 5 measures 40.1 × 54.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BSPD 5?

24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BSPD 5 design files?

From the SCFormulaElectric/USC-Electrical-Systems repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BSPD 5 design in my own project?

The repository has no license, so all rights stay with SCFormulaElectric. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BSPD 5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in USC-Electrical-Systems

Similar boards