8 open source boards using the BQ79616PAPRQ1
Real designs built with the BQ79616PAPRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Custom BMS
SCFormulaElectric
104.2 × 59.7 mm192 parts4LNo license9Bms cmu bq79616-hardware
gerhardmalberg
99 × 61 mm194 parts8LCERN-OHL-P-2.01Bms cmu bq79616-hardware
gerhardmalberg88
99 × 61 mm194 parts8LCERN-OHL-P-2.01Project63 BMS DaughterBoard
JacobParent7
150 × 100 mm165 parts4LNo license11STM32
LoRA board
SCFormulaElectric
61.2 × 38.9 mm52 parts4LNo license9STM32
UpdatedPrecharge
SCFormulaElectric
96.8 × 40.6 mm51 parts2LNo license9NXP
Dashbox
SCFormulaElectric
84.5 × 85.5 mm27 parts2LNo license9STM32
BSPD 5
SCFormulaElectric
40.1 × 54.3 mm24 parts2LNo license9
The BQ79616PAPRQ1 in open source designs
The gallery holds 8 open source boards using the BQ79616PAPRQ1 from 4 GitHub repositories; a typical one measures about 97.9 × 60.3 mm and carries around 109 components.
63% use four copper layers or more, and 25% carry an open source license.
The most starred is Project63 BMS DaughterBoard by JacobParent7.
Parts used alongside the BQ79616PAPRQ1
What boards using the BQ79616PAPRQ1 are built for
BQ79616PAPRQ1: common questions
Where can I find a BQ79616PAPRQ1 reference design?
Each of the 8 boards on this page is a real design using the BQ79616PAPRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BQ79616PAPRQ1 use?
Most are built on STM32 (4) and NXP (1).
How big is a typical board using the BQ79616PAPRQ1?
The median is 97.9 × 60.3 mm, and 38% are two-layer designs.
What is the most popular open source board using the BQ79616PAPRQ1?
By GitHub stars, Project63 BMS DaughterBoard by JacobParent7, with 11 stars.
Can I simulate one of these boards using the BQ79616PAPRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.