9 open source boards using the TPS563300
Real designs built with the TPS563300, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Custom BMS
SCFormulaElectric
104.2 × 59.7 mm192 parts4LNo license9STM32
IbScaleFeederLite
ibScale
51.6 × 89 mm74 parts4LCERN-OHL-S-2.00RP2040/RP2350
Virgil Power
da-penguin-guy
89 × 113 mm67 parts2LNo license1STM32
RelayBoard
SCFormulaElectric
53.5 × 71.2 mm70 parts2LNo license9STM32
LoRA board
SCFormulaElectric
61.2 × 38.9 mm52 parts4LNo license9STM32
UpdatedPrecharge
SCFormulaElectric
96.8 × 40.6 mm51 parts2LNo license9NXP
Dashbox
SCFormulaElectric
84.5 × 85.5 mm27 parts2LNo license9STM32
Roll Hoop Board
SCFormulaElectric
106.7 × 36 mm26 parts2LNo license9STM32
BSPD 5
SCFormulaElectric
40.1 × 54.3 mm24 parts2LNo license9
The TPS563300 in open source designs
The gallery holds 9 open source boards using the TPS563300 from 3 GitHub repositories; a typical one measures about 84.4 × 59.7 mm and carries around 52 components.
67% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Custom BMS by SCFormulaElectric.
Parts used alongside the TPS563300
Microcontrollers on boards using the TPS563300
What boards using the TPS563300 are built for
TPS563300: common questions
Where can I find a TPS563300 reference design?
Each of the 9 boards on this page is a real design using the TPS563300. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS563300 use?
Most are built on STM32 (7), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the TPS563300?
The median is 84.4 × 59.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the TPS563300?
By GitHub stars, Custom BMS by SCFormulaElectric, with 9 stars.
Can I simulate one of these boards using the TPS563300 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.