Amplifier tda7266
schoetec·SwiftSqueakBox·SwiftSqueakBox/amplifier_tda7266/amplifier_tda7266/amplifier_tda7266.kicad_pcb
About the Amplifier tda7266 PCB
Amplifier tda7266 is an open source PCB design by schoetec, published on GitHub under the MIT license. It is a 2-layer board measuring 66 × 50.8 mm, with 24 components from 22 distinct parts.
Other key parts include the TDA7266M. By type, the board carries 11 connectors, 6 resistors, 5 capacitors, 1 IC and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
A box to make Swift Squeak noise if asked to make these sounds.
1. ArduinoSwift : bevat de software voor ATTiny84 en ATTiny85/45 2. dplayerswiftv3.1 : Bevat de kicad 6.0 schema en PCB ontwerp files 3. KiCadArduinoNanoDFPlayer_footprints-master : Bevat het ontwerp voor de DFPlayer kicad footprint.
Main components on the Amplifier tda7266
Amplifier tda7266 bill of materials (BOM)
24 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TDA7266M | TO-220-15_P2.54x2.54mm_StaggerOdd_Lead4.58mm_Vertical | U1 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | mute_stby_in | PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | audio_in_G_L_R | PinHeader_1x03_P2.00mm_Vertical | J2 |
| 1 | audio_in_mono | PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | LS1 | PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | power | PinHeader_1x02_P2.00mm_Vertical | J6 |
| 1 | V-OUT | PinHeader_1x02_P2.00mm_Vertical | J9 |
| 1 | 5V conn2 | PinHeader_1x02_P2.00mm_Vertical | J12 |
| 1 | 5V conn1 | PinHeader_1x02_P2.00mm_Vertical | J13 |
| 1 | IN2 | PinHeader_1x02_P2.00mm_Vertical | J14 |
| 1 | LS2 | PinHeader_1x02_P2.00mm_Vertical | J15 |
| 1 | 470uF | C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 100nF | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C2 |
| 2 | 0.22uF | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C3, C5 |
| 1 | 10uF | C_Radial_D5.0mm_H11.0mm_P2.00mm | C4 |
| 1 | 47K(22K) | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 47K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
Amplifier tda7266 design files
The KiCad project lives in the schoetec/SwiftSqueakBox repository on GitHub; these links point at the commit this page was built from.
Amplifier tda7266: common questions
How big is the Amplifier tda7266 PCB?
The Amplifier tda7266 measures 66 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amplifier tda7266?
24 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amplifier tda7266 design files?
From the schoetec/SwiftSqueakBox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amplifier tda7266 design in my own project?
Yes, under the terms of its MIT license, which schoetec chose for the repository.
More boards in SwiftSqueakBox
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687