Rocket

scottzach1·Project-Beans·hardware_package/prototyping/pcb_design/initial_schematic/RocketPCB.kicad_pcb

Rocket PCB layout, top view — open source STM32 board by scottzach1

About the Rocket PCB

Rocket is an open source STM32 PCB design by scottzach1, published on GitHub under the MIT license. It is a 2-layer board measuring 121.9 × 74.9 mm, with 7 components from 7 distinct parts.

Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the TPS62160DSG, AP2112K-3.3 and MPL3115A2. By type, the board carries 4 ICs, 1 transistor, 1 connector and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

VUW Engineering project to deliver a model rocket for a client.

Documentation on SD card reader/writer pinout available here:

Need to determine whether it will operate in SD or SPI mode.

- The battery charger is only capable of charging one cell in the battery, a potential work around for this could be to include two battery charger units and have them operating in parallel. Alternatively, could buy an external battery charger or charge individual cells sequentially.

Main components on the Rocket

Rocket bill of materials (BOM)

7 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F405RGTx
U1
1
TPS62160DSG
U2
1
AP2112K-3.3
U6
1
MPL3115A2
U7
1
DMG2301L
Q1
1
Conn_01x03_Female
J3
1
MBR0540
D3

Rocket design files

The KiCad project lives in the scottzach1/Project-Beans repository on GitHub; these links point at the commit this page was built from.

Rocket: common questions

What microcontroller does the Rocket use?

The Rocket is built around the STM32F405RGTx, from the STM32 family.

How big is the Rocket PCB?

The Rocket measures 121.9 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rocket?

7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rocket design files?

From the scottzach1/Project-Beans repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Rocket design in my own project?

Yes, under the terms of its MIT license, which scottzach1 chose for the repository.

Can I test firmware for the Rocket without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Project-Beans

Similar boards