Backplane Slots
scular-HCC·DualLaserPDHDriver·Laser_Driver_v7/Backplane/Backplane_Slots.kicad_pcb
About the Backplane Slots PCB
Backplane Slots is an open source PCB design by scular-HCC, published on GitHub under the Custom license license. It is a 2-layer board measuring 390.5 × 128.6 mm, with 11 components from 4 distinct parts.
By type, the board carries 8 connectors, 1 diode, 1 capacitor and 1 resistor.
It belongs with the test & measurement designs in this gallery.
From the project
Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference
A precision two-channel controller for 1550 nm DFB butterfly lasers — a differential optical thermometer built as a 3U Eurocard instrument.
Each channel provides low-noise constant-current laser drive, a bipolar linear TEC temperature controller, RF frequency modulation, and a synchronous-demodulation Pound–Drever–Hall lock that holds the laser to the side of an optical resonance. Lasers A and B lock to their own fringe of a shared reference cavity; the beat frequency between them, Δν = S·(TB − TA) with S ≈ 2 GHz/K, is a ratiometric measurement in which slow common-mode drift cancels.

Backplane Slots bill of materials (BOM)
11 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | DIN41612_03x32_C_Split | DIN41612_C_3x32_Female_Vertical_THT | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | SMAJ5.0CA-E3/61 SMAJ5.0CA | D_SMA-SMB_Universal_Handsoldering | D3 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
Backplane Slots design files
The KiCad project lives in the scular-HCC/DualLaserPDHDriver repository on GitHub; these links point at the commit this page was built from.
Backplane Slots: common questions
How big is the Backplane Slots PCB?
The Backplane Slots measures 390.5 × 128.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Backplane Slots?
11 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Backplane Slots design files?
From the scular-HCC/DualLaserPDHDriver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Backplane Slots design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in DualLaserPDHDriver
Laser driver v3 Power
scular-HCC
261.3 × 165.2 mm273 parts2LCustom license0NXP
Dual PDH Laser driver v3
scular-HCC
291.8 × 265.6 mm197 parts2LCustom license0NXP
DIG Card
scular-HCC
160 × 100 mm187 parts6LCustom license0CH Card
scular-HCC
160 × 100 mm159 parts6LCustom license0Pm1p8V pm5V 5Vref 5Vlaser
scular-HCC
160 × 100 mm106 parts2LCustom license0AFE Card
scular-HCC
160 × 100 mm106 parts2LCustom license0Mains 18V TEC
scular-HCC
160 × 100 mm88 parts2LCustom license0Pm6V
scular-HCC
160 × 100 mm64 parts2LCustom license0Pm22V
scular-HCC
160 × 100 mm28 parts2LCustom license0AC Board
scular-HCC
62.4 × 42.7 mm5 parts2LCustom license0BTF Card
scular-HCC
43.4 × 75 mm4 parts2LCustom license0
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kEleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528