BreakoutBoard
About the BreakoutBoard PCB
BreakoutBoard is an open source PCB design by sdmay24-21, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 76.2 × 73.8 mm, with 23 components from 11 distinct parts.
Other key parts include the AD5676BRUZ, MCP3464T-E/NC, 23K256T-I/SN and LMV1032UP-06/NOPB. By type, the board carries 8 ICs, 5 connectors, 4 capacitors and 2 test points.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
https://shop.karoryfer.com/pages/free-samples
Main components on the BreakoutBoard
BreakoutBoard bill of materials (BOM)
23 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD5676BRUZ | SOP65P640X120-20N | IC1 |
| 2 | MCP3464T-E/NC MCP3464T-E_NC | QFN40P300X300X60-21N-D | IC2, IC7 |
| 4 | 23K256T-I/SN 23K256T-I_SN | SOIC127P600X175-8N | IC3, IC4, IC5, IC6 |
| 1 | LMV1032UP-06/NOPB LMV1032UP-06_NOPB | BGA4C50P2X2_115X115X40 | IC8 |
| 2 | SJ-63062A | CUI_SJ-63062A | J1, J2 |
| 1 | CONN_01X06_FEMALE Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | CONN_01X27_FEMALE Conn_01x27_Female | PinHeader_1x28_P2.54mm_Vertical | J10 |
| 1 | CONN_01X28_PIN Conn_01x28_Pin | PinHeader_1x28_P2.54mm_Vertical | J11 |
| 2 | TestPoint | TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP1, TP2 |
| 4 | 3360Y-1-103LF | 3360Y1103LF | VR1, VR2, VR3, VR4 |
| 4 | 0.1uf - CC0805KRX7R9BB104 | C_0805_2012Metric | C1, C2, C3, C4 |
BreakoutBoard design files
The KiCad project lives in the sdmay24-21/ASIC-GuitarPedal repository on GitHub; these links point at the commit this page was built from.
BreakoutBoard: common questions
How big is the BreakoutBoard PCB?
The BreakoutBoard measures 76.2 × 73.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BreakoutBoard?
23 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BreakoutBoard design files?
From the sdmay24-21/ASIC-GuitarPedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BreakoutBoard design in my own project?
Yes, under the terms of its Apache-2.0 license, which sdmay24-21 chose for the repository.
More boards in ASIC-GuitarPedal
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k