ATtinyX12 Development Board
sdp8483·attiny_devboard·pcb/attinyx12/attinyx12_dev.kicad_pcb
About the ATtinyX12 Development Board
ATtinyX12 Development Board is an open source AVR/Arduino PCB design by sdp8483, published on GitHub under the MIT license. It is a 2-layer board measuring 22.6 × 51 mm, with 24 components from 16 distinct parts.
Its main chip is the ATTINY212-SSN, from the AVR/Arduino family. Other key parts include the USBLC6-2SC6 and CH342K. By type, the board carries 6 connectors, 5 capacitors, 5 resistors, 4 diodes, 3 ICs and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ATTiny Development Boards
Directory structure for starting a basic project. Originally based off Hackaday article: https://hackaday.com/2017/05/18/kicad-best-practises-library-management/
Main components on the ATtinyX12 Development Board
ATtinyX12 Development Board bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | ATTINY212-SSN ATtiny212-SS | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | CH342K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U3 |
| 1 | GT-USB-7010ASV USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | IPCP254M04PB08V Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | IPCP254M12PB28V Conn_02x06 | PinHeader_2x06_P2.54mm_Vertical | J4 |
| 2 | IPCP254M02PB08V Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 1 | MF-PSMF075X-2 Polyfuse | Fuse_0805_2012Metric | F1 |
| 2 | NCD0603R1 LED | LED_0603_1608Metric | D1, D4 |
| 2 | PMEG6020ER,115 PMEG6020ER | Nexperia_CFP3_SOD-123W | D2, D3 |
| 1 | FS18F105Z160PBG 1uF | C_0603_1608Metric | C1 |
| 2 | CL10B104KO8NNNC 100nF | C_0603_1608Metric | C2, C4 |
| 2 | FS18F105Z160PBG 1u | C_0603_1608Metric | C3, C5 |
| 2 | RC1608J102CS 1k | R_0603_1608Metric | R1, R4 |
| 2 | RC0603FR-075K1L 5k1 | R_0603_1608Metric | R2, R3 |
| 1 | RC0805FR-07470RL 470 | R_0805_2012Metric | R5 |
ATtinyX12 Development Board design files
The KiCad project lives in the sdp8483/attiny_devboard repository on GitHub; these links point at the commit this page was built from.
ATtinyX12 Development Board: common questions
What microcontroller does the ATtinyX12 Development Board use?
The ATtinyX12 Development Board is built around the ATTINY212-SSN, from the AVR/Arduino family.
How big is the ATtinyX12 Development Board?
The ATtinyX12 Development Board measures 22.6 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATtinyX12 Development Board?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the ATtinyX12 Development Board design files?
From the sdp8483/attiny_devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ATtinyX12 Development Board design in my own project?
Yes, under the terms of its MIT license, which sdp8483 chose for the repository.
Can I test firmware for the ATtinyX12 Development Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in attiny_devboard
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k