3 open source boards using the CH342K

Real designs built with the CH342K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The CH342K in open source designs

The gallery holds 3 open source boards using the CH342K from 2 GitHub repositories; a typical one measures about 22.6 × 60 mm and carries around 24 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is ETH2Zigbee by acha666.

Microcontrollers on boards using the CH342K

What boards using the CH342K are built for

CH342K: common questions

Where can I find a CH342K reference design?

Each of the 3 boards on this page is a real design using the CH342K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CH342K use?

Most are built on AVR/Arduino (2) and ESP32 (1).

How big is a typical board using the CH342K?

The median is 22.6 × 60 mm, and 100% are two-layer designs.

What is the most popular open source board using the CH342K?

By GitHub stars, ETH2Zigbee by acha666, with 0 stars.

Can I simulate one of these boards using the CH342K before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part