RP2040Devboard

Sealflux·RP2040Devboard·PCB/RP2040Devboard.kicad_pcb

About the RP2040Devboard PCB

RP2040Devboard is an open source RP2040/RP2350 PCB design by Sealflux, published on GitHub under the MIT license. It is a 2-layer board measuring 21 × 51 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ, ABM8-272-T3 and H7233-1. By type, the board carries 17 capacitors, 7 resistors, 4 ICs, 4 connectors and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A custom devboard built around the raspberry pi 2040 MCU.

Main components on the RP2040Devboard

RP2040 W25Q16JVUXIQ ABM8-272-T3 H7233-1

RP2040Devboard bill of materials (BOM)

33 components, 16 distinct parts.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	W25Q16JVUXIQ Winbond(华邦)	USON-8_L3.0-W2.0-P0.50-BL-EP	U2
1	ABM8-272-T3 ABM8-272-T3_C20625731 ABRACON	CRYSTAL-SMD_4P-L3.2-W2.5-BL	U3
1	H7233-1 H7233-1_C277859 Siproin(上海矽朋)	SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR	U4
1	USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J1
2	Conn_01x20	PinHeader_1x20_P2.54mm_Vertical	J2, J3
1	Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J4
1	SW_Push	KEY-SMD_B3U-1000PM	SW1
12	CC0402KRX7R7BB104 100nF YAGEO(国巨)	C0402	C1, C2, C3, C4, C5, C6, C7, C8 +4
1	CL10B105KA8NNNC 1uF SAMSUNG(三星)	C0603	C9
2	CL10A106MP8NNNC 10uF SAMSUNG(三星)	C0603	C13, C14
2	CC0402JRNPO9BN120 12pF YAGEO(国巨)	C0402	C15, C16
2	FRC0603F2200TS 5.1kΩ FOJAN(富捷)	R0603	R1, R2
2	0603WAF270JT5E 27Ω UNI-ROYAL(厚声)	R0603	R3, R4
2	FRC0603F1001TS 1kΩ FOJAN(富捷)	R0603	R5, R6
1	RC0402FR-0710KL 10kΩ YAGEO(国巨)	R0402	R7

RP2040Devboard design files

The KiCad project lives in the Sealflux/RP2040Devboard repository on GitHub; these links point at the commit this page was built from.

LayoutPCB/RP2040Devboard.kicad_pcb
SchematicPCB/RP2040Devboard.kicad_sch

RP2040Devboard: common questions

What microcontroller does the RP2040Devboard use?

The RP2040Devboard is built around the RP2040, from the RP2040/RP2350 family.

How big is the RP2040Devboard PCB?

The RP2040Devboard measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RP2040Devboard?

33 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the RP2040Devboard design files?

From the Sealflux/RP2040Devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RP2040Devboard design in my own project?

Yes, under the terms of its MIT license, which Sealflux chose for the repository.

Can I test firmware for the RP2040Devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.