Asdf
SeanCarr1·KiCad-seancarr1·Power Supply Module PCB Project/asdf.kicad_pcb
About the Asdf PCB
Asdf is an open source PCB design by SeanCarr1, published on GitHub. It is a 2-layer board measuring 76.2 × 50.8 mm, with 20 components from 13 distinct parts.
Other key parts include the LM317_TO-220. By type, the board carries 6 diodes, 5 connectors, 4 capacitors, 2 resistors, 1 IC and 1 fuse.
From the project
A compilation of my KiCad projects from school to personal projects

Main components on the Asdf
Asdf bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 2 | CONN_01X01_PIN out | TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J1, J5 |
| 2 | CONN_01X01_PIN Screw_Terminal_01x03 | TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J2, J3 |
| 1 | CONN_01X01_PIN secondary winding | TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J4 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 5k | Potentiometer_5mm_sean | Potmeter1 |
| 5 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D7 |
| 1 | LED | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D5 |
| 1 | 1000uF | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | .1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 2 | 1uF | CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 1 | 1800 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Asdf design files
The KiCad project lives in the SeanCarr1/KiCad-seancarr1 repository on GitHub; these links point at the commit this page was built from.
Asdf: common questions
How big is the Asdf PCB?
The Asdf measures 76.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Asdf?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Asdf design files?
From the SeanCarr1/KiCad-seancarr1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Asdf design in my own project?
The repository has no license, so all rights stay with SeanCarr1. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-seancarr1
Password
SeanCarr1
48.3 × 31.6 mm30 parts2LNo license0Water
SeanCarr1
20.3 × 12.4 mm21 parts2LNo license0Dice
SeanCarr1
72.1 × 26.4 mm21 parts2LNo license0PSU 10-13
SeanCarr1
59.3 × 40.9 mm20 parts2LNo license0Kicadpartsplacer
SeanCarr1
79.3 × 46.9 mm17 parts2LNo license0Act3
SeanCarr1
23.1 × 24.1 mm17 parts2LNo license0Heart pcb 2
SeanCarr1
77.3 × 72.3 mm16 parts2LNo license0Vibrator
SeanCarr1
21 × 12.1 mm12 parts2LNo license0Project1
SeanCarr1
152.4 × 76.2 mm11 parts2LNo license0Dark sensor
SeanCarr1
19.6 × 19.3 mm7 parts2LNo license04017
SeanCarr1
12.5 × 9.3 mm3 parts2LNo license0