PSU 10-13
SeanCarr1·KiCad-seancarr1·Power Supply Module PCB Project/PSU 10-13.kicad_pcb
About the PSU 10-13 PCB
PSU 10-13 is an open source PCB design by SeanCarr1, published on GitHub. It is a 2-layer board measuring 59.3 × 40.9 mm, with 20 components from 13 distinct parts.
Other key parts include the LM317_TO-220. By type, the board carries 6 diodes, 5 connectors, 4 capacitors, 2 resistors, 1 IC and 1 fuse.
From the project
A compilation of my KiCad projects from school to personal projects

Main components on the PSU 10-13
PSU 10-13 bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 2 | CONN_01X01_PIN out | TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J1, J5 |
| 2 | CONN_01X01_PIN Screw_Terminal_01x03 | TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J2, J3 |
| 1 | CONN_01X01_PIN secondary winding | TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J4 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 5k | Potentiometer_5mm_sean | Potmeter1 |
| 5 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D7 |
| 1 | LED | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D5 |
| 1 | 1000uF | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | .1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 2 | 1uF | CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 1 | 1800 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
PSU 10-13 design files
The KiCad project lives in the SeanCarr1/KiCad-seancarr1 repository on GitHub; these links point at the commit this page was built from.
PSU 10-13: common questions
How big is the PSU 10-13 PCB?
The PSU 10-13 measures 59.3 × 40.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSU 10-13?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PSU 10-13 design files?
From the SeanCarr1/KiCad-seancarr1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PSU 10-13 design in my own project?
The repository has no license, so all rights stay with SeanCarr1. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-seancarr1
Password
SeanCarr1
48.3 × 31.6 mm30 parts2LNo license0Water
SeanCarr1
20.3 × 12.4 mm21 parts2LNo license0Dice
SeanCarr1
72.1 × 26.4 mm21 parts2LNo license0Asdf
SeanCarr1
76.2 × 50.8 mm20 parts2LNo license0Kicadpartsplacer
SeanCarr1
79.3 × 46.9 mm17 parts2LNo license0Act3
SeanCarr1
23.1 × 24.1 mm17 parts2LNo license0Heart pcb 2
SeanCarr1
77.3 × 72.3 mm16 parts2LNo license0Vibrator
SeanCarr1
21 × 12.1 mm12 parts2LNo license0Project1
SeanCarr1
152.4 × 76.2 mm11 parts2LNo license0Dark sensor
SeanCarr1
19.6 × 19.3 mm7 parts2LNo license04017
SeanCarr1
12.5 × 9.3 mm3 parts2LNo license0