Password
SeanCarr1·KiCad-seancarr1·Password Keypad PCB Project/password/password.kicad_pcb
About the Password PCB
Password is an open source PCB design by SeanCarr1, published on GitHub. It is a 2-layer board measuring 48.3 × 31.6 mm, with 30 components from 13 distinct parts.
Other key parts include the 4017. By type, the board carries 9 switches, 6 diodes, 6 resistors, 3 connectors, 3 capacitors and 1 IC.
From the project
A compilation of my KiCad projects from school to personal projects

Main components on the Password
Password bill of materials (BOM)
30 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4017 | DIP-16_W7.62mm_Socket | U1 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | CONN_01X01_PIN VCC Pin | PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | CONN_01X01_PIN GND Pin | PinHeader_1x01_P1.00mm_Vertical | J4 |
| 1 | CONN_01X01_PIN Conn_01x03_Socket | PinHeader_1x03_P1.00mm_Vertical | J6 |
| 1 | SRD-12VDC-SL-C | RELAY_SRD-12VDC-SL-C | K1 |
| 9 | SW_Push | SW_Push_1P1T_NO_CK_KSC6xxG | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 5 | 1N4001 | D_SMA | D1, D2, D3, D4, D5 |
| 1 | RED | LED_D5.0mm | D7 |
| 3 | C | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3 |
| 2 | 10k | R_0805_2012Metric | R1, R2 |
| 3 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R6, R7 |
| 1 | 330 | R_0805_2012Metric | R5 |
Password design files
The KiCad project lives in the SeanCarr1/KiCad-seancarr1 repository on GitHub; these links point at the commit this page was built from.
Password: common questions
How big is the Password PCB?
The Password measures 48.3 × 31.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Password?
30 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Password design files?
From the SeanCarr1/KiCad-seancarr1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Password design in my own project?
The repository has no license, so all rights stay with SeanCarr1. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-seancarr1
Dice
SeanCarr1
72.1 × 26.4 mm21 parts2LNo license0Water
SeanCarr1
20.3 × 12.4 mm21 parts2LNo license0PSU 10-13
SeanCarr1
59.3 × 40.9 mm20 parts2LNo license0Asdf
SeanCarr1
76.2 × 50.8 mm20 parts2LNo license0Kicadpartsplacer
SeanCarr1
79.3 × 46.9 mm17 parts2LNo license0Act3
SeanCarr1
23.1 × 24.1 mm17 parts2LNo license0Heart pcb 2
SeanCarr1
77.3 × 72.3 mm16 parts2LNo license0Vibrator
SeanCarr1
21 × 12.1 mm12 parts2LNo license0Project1
SeanCarr1
152.4 × 76.2 mm11 parts2LNo license0Dark sensor
SeanCarr1
19.6 × 19.3 mm7 parts2LNo license04017
SeanCarr1
12.5 × 9.3 mm3 parts2LNo license0