Kicadpartsplacer
SeanCarr1·KiCad-seancarr1·Power Supply Module PCB Project/kicadpartsplacer.kicad_pcb
About the Kicadpartsplacer PCB
Kicadpartsplacer is an open source PCB design by SeanCarr1, published on GitHub. It is a 2-layer board measuring 79.3 × 46.9 mm, with 17 components from 17 distinct parts.
Other key parts include the LM317_TO-220. By type, the board carries 7 connectors, 3 diodes, 3 capacitors, 2 resistors and 1 IC.
From the project
A compilation of my KiCad projects from school to personal projects

Main components on the Kicadpartsplacer
Kicadpartsplacer bill of materials (BOM)
17 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 1 | CONN_01X01_PIN 1 sa vout (0-24V) 2 ay "gnd ng circuit" | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J1 |
| 1 | CONN_01X01_PIN voltmeter ni satan | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J2 |
| 1 | CONN_01X01_PIN plug | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J3 |
| 1 | CONN_01X01_PIN sec. winding | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J4 |
| 1 | CONN_01X01_PIN Switch | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J5 |
| 1 | CONN_01X01_PIN prim winding | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J6 |
| 1 | CONN_01X01_PIN fuse holder | TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical | J7 |
| 1 | 5k | Potentiometer_5mm_sean | potentiometer1 |
| 1 | LED | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D5 |
| 1 | 1N4001 | D_DO-34_SOD68_P5.08mm_Vertical_AnodeUp | D6 |
| 1 | D_Bridge_+AA- | Diode_Bridge_Vishay_KBPM | D7 |
| 1 | 1000uF | CP_Elec_3x5.3 | C1 |
| 1 | .1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 1uF | CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 1800 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Kicadpartsplacer design files
The KiCad project lives in the SeanCarr1/KiCad-seancarr1 repository on GitHub; these links point at the commit this page was built from.
Kicadpartsplacer: common questions
How big is the Kicadpartsplacer PCB?
The Kicadpartsplacer measures 79.3 × 46.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicadpartsplacer?
17 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicadpartsplacer design files?
From the SeanCarr1/KiCad-seancarr1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Kicadpartsplacer design in my own project?
The repository has no license, so all rights stay with SeanCarr1. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-seancarr1
Password
SeanCarr1
48.3 × 31.6 mm30 parts2LNo license0Water
SeanCarr1
20.3 × 12.4 mm21 parts2LNo license0Dice
SeanCarr1
72.1 × 26.4 mm21 parts2LNo license0PSU 10-13
SeanCarr1
59.3 × 40.9 mm20 parts2LNo license0Asdf
SeanCarr1
76.2 × 50.8 mm20 parts2LNo license0Act3
SeanCarr1
23.1 × 24.1 mm17 parts2LNo license0Heart pcb 2
SeanCarr1
77.3 × 72.3 mm16 parts2LNo license0Vibrator
SeanCarr1
21 × 12.1 mm12 parts2LNo license0Project1
SeanCarr1
152.4 × 76.2 mm11 parts2LNo license0Dark sensor
SeanCarr1
19.6 × 19.3 mm7 parts2LNo license04017
SeanCarr1
12.5 × 9.3 mm3 parts2LNo license0