GuavaPI
SebRincon·GuavaPI·GuavaPi/GuavaPi_GPIO.kicad_sch
About the GuavaPI PCB
GuavaPI is an open source ESP32 PCB design by SebRincon, published on GitHub. It is a board, with 93 components from 37 distinct parts.
Its main chip is the ESP32_C3_QFN32, from the ESP32 family. Other key parts include the EMMC04G-M627-A01, USB_C_C393939, MIC5504 and RFECA3216060A1T_NEW3_M. By type, the board carries 39 capacitors, 36 resistors, 7 ICs, 4 connectors, 2 crystals and 2 diodes.
Main components on the GuavaPI
GuavaPI bill of materials (BOM)
93 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ESP32_C3_QFN32 | QFN32 | U1, U6 |
| 1 | EMMC04G-M627-A01 | BGA153C50P14X14_1300X1150X100 | U2 |
| 1 | ~ | U3 | |
| 2 | USB_C_C393939 | USBC_C393939 | U5, U9 |
| 1 | MIC5504 | TDFN4 | U7 |
| 1 | RFECA3216060A1T_NEW3_M | RFECA3216060A1T_NEW3_M | A1 |
| 2 | CM9V_T1A | XTAL_1016 | X1, X2 |
| 1 | SMT_JUMPER_2_NC_PASTE | JUMPER_SMALL | J1 |
| 2 | JUMPER_SMALL | JUMPER_SMALL | J2, J4 |
| 1 | Micro_SD_Card_Det1 | J5 | |
| 1 | 211964-0001 | 2119640001 | ANT1 |
| 1 | BUTTON_4PIN | BUTTON_SMD_12MM | B1 |
| 2 | DAN222 | SOT523 | D1, D3 |
| 6 | 1µ | C0402_S | C1, C2, C6, C83, C88, C93 |
| 2 | C0402_S | C0402_S | C5, C89 |
| 2 | 10µ | C0402_S | C8, C78 |
| 4 | 0,1µ | C0402_S | C9, C10, C79, C87 |
| 4 | 10p | C0402_S | C11, C12, C84, C85 |
| 4 | C-EU-0402-WOKEEPOUT_S | C0402_S | C13, C14, C81, C82 |
| 2 | 3.3pF | C0402_S | C17, C90 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1nH | C0402_S | C18, C92 |
| 6 | 2u2 | C68, C69, C70, C71, C72, C73 | |
| 2 | C | C74, C75 | |
| 2 | 0.1uF | C76, C97 | |
| 1 | 10uF | C77 | |
| 1 | 2.2uF | C80 | |
| 1 | NC | C86 | |
| 10 | 10k | R0402 | R1, R8, R13, R14, R15, R24, R25, R28 +2 |
| 2 | 1k | R0402 | R7, R23 |
| 2 | 1M | R0402 | R9, R27 |
| 4 | 5.1k | R0402 | R11, R12, R35, R36 |
| 8 | 47k | R16, R17, R32, R37, R38, R39, R41, R42 | |
| 2 | R | R18, R19 | |
| 5 | 100k | R20, R22, R26, R31, R33 | |
| 1 | 0R | R21 | |
| 1 | 10K | R34 | |
| 1 | 33R | R43 |
GuavaPI design files
The KiCad project lives in the SebRincon/GuavaPI repository on GitHub; these links point at the commit this page was built from.
- SchematicGuavaPi/GuavaPi_GPIO.kicad_sch
- BOMbom.csv
GuavaPI: common questions
What microcontroller does the GuavaPI use?
The GuavaPI is built around the ESP32_C3_QFN32, from the ESP32 family.
How many components are on the GuavaPI?
93 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GuavaPI design files?
From the SebRincon/GuavaPI repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the GuavaPI design in my own project?
The repository has no license, so all rights stay with SebRincon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GuavaPI without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k