The badge
SecureRob·hacking_the_badge·hw/KiCad_badge/the_badge/the_badge.kicad_pcb
About the The badge PCB
The badge is an open source Microchip SAM PCB design by SecureRob, published on GitHub. It is a 4-layer board measuring 76.2 × 101.6 mm, with 72 components from 31 distinct parts.
Its main chip is the ATSAMD21J18A-A, from the Microchip SAM family. Other key parts include the MIC5301, TSOP582xx, ATECC608B-SSHDA and MCP16252. By type, the board carries 26 resistors, 14 capacitors, 9 diodes, 6 connectors, 6 switches and 5 ICs.
It belongs with the wearables designs in this gallery.
Main components on the The badge
The badge bill of materials (BOM)
72 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC5301 | TSOP-5_1.65x3.05mm_P0.95mm | U1 |
| 1 | TSOP582xx | Vishay_MINICAST-3Pin | U2 |
| 1 | ATSAMD21J18A-A | TQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ATECC608B-SSHDA | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MCP16252 | SOT-23-6 | U5 |
| 1 | NPN | SOT-23-3 | Q1 |
| 1 | 049SS2-24.000F20DTLJK | Crystal_SMD_HC49-SD | Y2 |
| 2 | PPTC081LFBN-RC | MIKROBUS_HOST_CONN | CON1, CON2 |
| 1 | 1156861 | PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | 0475710001 | 47571-0001_MOL | J2 |
| 1 | USB4105-GF-A | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | 36-596-ND | BAT_596 | BT1 |
| 1 | 36-590-ND | BAT_590 | BT2 |
| 1 | M50-3530242 | PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 6 | TS02-66-70-BK-160-LCR-D | SW_PUSH_6mm_H4.3mm | SW1, SW3, SW4, SW5, SW6, SW7 |
| 6 | 732-4971-1-ND | LED_0603_1608Metric | D1, D2, D7, D8, D13, D14 |
| 2 | D_Schottky | D_SOD-523 | D3, D5 |
| 1 | IR 940nm | LED_0603_1608Metric | D4 |
| 1 | 4.7uH | L_0805_2012Metric | L1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10uF | C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 5 | 100nF | C_0603_1608Metric | C6, C11, C14, C15, C16 |
| 2 | 1uF | C_0603_1608Metric | C7, C13 |
| 2 | 16pF | C_0603_1608Metric | C9, C12 |
| 15 | 10k | R_0603_1608Metric | R1, R5, R16, R20, R21, R22, R24, R26 +7 |
| 6 | 5.1k | R_0603_1608Metric | R2, R4, R6, R15, R38, R39 |
| 1 | NP | R_0603_1608Metric | R3 |
| 1 | 100 | R_0603_1608Metric | R7 |
| 1 | 10 | R_0603_1608Metric | R8 |
| 1 | 1M | R_0603_1608Metric | R10 |
| 1 | 1.69M | R_0603_1608Metric | R12 |
The badge design files
The KiCad project lives in the SecureRob/hacking_the_badge repository on GitHub; these links point at the commit this page was built from.
The badge: common questions
What microcontroller does the The badge use?
The The badge is built around the ATSAMD21J18A-A, from the Microchip SAM family.
How big is the The badge PCB?
The The badge measures 76.2 × 101.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the The badge?
72 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the The badge design files?
From the SecureRob/hacking_the_badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the The badge design in my own project?
The repository has no license, so all rights stay with SecureRob. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the The badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in hacking_the_badge
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416