6 open source boards using the ATECC608B-SSHDA

Real designs built with the ATECC608B-SSHDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ATECC608B-SSHDA

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ATECC608B-SSHDA connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The SDA pin has a pull-up to VCC on 3 of 6 designs, most often 3.3 kΩ (then 4.7 kΩ).
  • The SCL pin has a pull-up to VCC on 3 of 6 designs, most often 3.3 kΩ (then 4.7 kΩ).
NCpin 1, 2, 3, 7Connected to: Not connected 100%
GNDpin 4Connected to: GND 100%
SDApin 5Connected to: The microcontroller 67%, TCA9534 33%
  • Pull-up to VCC on 50% · 3.3 kΩ (1), 4.7 kΩ (1), 5.1 kΩ (1)
SCLpin 6Connected to: The microcontroller 67%, TCA9534 33%
  • Pull-up to VCC on 50% · 3.3 kΩ (1), 4.7 kΩ (1), 5.1 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oniondao badge by OnionDAO-git, Mender shield by joelguittet, Fw16 by BBBSnowball and Rubber-Ducky by ishantmahatopro.

The ATECC608B-SSHDA in open source designs

The gallery holds 6 open source boards using the ATECC608B-SSHDA from 6 GitHub repositories; a typical one measures about 70.6 × 95.9 mm and carries around 61 components.

83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Oniondao badge by OnionDAO-git.

Microcontrollers on boards using the ATECC608B-SSHDA

ATECC608B-SSHDA: common questions

Where can I find a ATECC608B-SSHDA reference design?

Each of the 6 boards on this page is a real design using the ATECC608B-SSHDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATECC608B-SSHDA VCC pin?

The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ATECC608B-SSHDA.

What pull-up resistor is used on the ATECC608B-SSHDA SDA pin?

The SDA pin has a pull-up to VCC on 3 of 6 designs, most often 3.3 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the ATECC608B-SSHDA.

What pull-up resistor is used on the ATECC608B-SSHDA SCL pin?

The SCL pin has a pull-up to VCC on 3 of 6 designs, most often 3.3 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the ATECC608B-SSHDA.

What parts are used alongside the ATECC608B-SSHDA?

The ESP32-S3-WROOM-1, CC1101RGP, CH340C, MCP73831-2-MC and ME6211C33M5 appear in the most repositories here.

Which microcontrollers do boards using the ATECC608B-SSHDA use?

Most are built on ESP32 (3), AVR/Arduino (1), RP2040/RP2350 (1) and Microchip SAM (1).

How big is a typical board using the ATECC608B-SSHDA?

The median is 70.6 × 95.9 mm, and 83% are two-layer designs.

What is the most popular open source board using the ATECC608B-SSHDA?

By GitHub stars, Oniondao badge by OnionDAO-git, with 17 stars.

Can I simulate one of these boards using the ATECC608B-SSHDA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part