Sectropad

SelimK1·Sectropad·PCB/Sectropad.kicad_pcb

Sectropad PCB layout, top view — open source RP2040/RP2350 board by SelimK1

About the Sectropad PCB

Sectropad is an open source RP2040/RP2350 PCB design by SelimK1, published on GitHub. It is a 2-layer board measuring 67.1 × 55.6 mm, with 12 components from 6 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 5 switches, 5 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Helooooooooo Sectropad is a macropad with 4 keys one of them is 1.5 U it also has one rotary controller and one 0.91 inch oled screen. This is also my first time trying to make an pcb and using fusion. It was hard to use fusion because i was really unfamiliar with the app since i

Helooooooooo Sectropad is a macropad with 4 keys one of them is 1.5 U it also has one rotary controller and one 0.91 inch oled screen. This is also my first time trying to make an pcb and using fusion. It was hard to use fusion because i was really unfamiliar with the app since im normally using blender. This took way too long than i expected because i ahd to remake my case twice because my measurements wasnt correct. Case

Sectropad, from the project README
From the project README

Main components on the Sectropad

Sectropad bill of materials (BOM)

12 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
3
SW_PUSH_45DEG
SW_Push_45deg
SW1, SW2, SW5
1
RotaryEncoder_Switch_MP
SW4
1
SW_PUSH_45DEG
SW_Push_45deg
SW6
5
1N4148
D3, D4, D5, D6, D7

Sectropad design files

The KiCad project lives in the SelimK1/Sectropad repository on GitHub; these links point at the commit this page was built from.

Sectropad: common questions

What microcontroller does the Sectropad use?

The Sectropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Sectropad PCB?

The Sectropad measures 67.1 × 55.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sectropad?

12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sectropad design files?

From the SelimK1/Sectropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sectropad design in my own project?

The repository has no license, so all rights stay with SelimK1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sectropad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards