Adapter
selvanair·potentiometer·hardware/pcbs/multiplexer_adapters/mux_to_3pin/adapter.kicad_pcb
About the Adapter PCB
Adapter is an open source PCB design by selvanair, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 26.7 × 50.8 mm, with 8 components from 3 distinct parts.
By type, the board carries 7 relays and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, firmware and software for IO Rodeo's Potentiostat Shield.
Hardware design, firmware and software for IO Rodeo's Potentiostat Shield.
Designed as a shield for teensy 3.2 development board. 12-bit voltage output with four range settings: +/- 1, 2, 5, 10V 16-bit current measurement with four range settings: +/- 1, 10, 100, 1000 uA ranges Can be programmed over USB using the Arduino IDE (teensyduino). Expansion headers with DIO, analog inputs, UART, I2C, and SPI Schematic
Adapter bill of materials (BOM)
8 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ED2635 CONN_5X2 Digikey | 5X2_SHRD_HEADER_FEMALE | P1 |
| 1 | S1111EC-03 CONN_3 Digikey | PIN_ARRAY_3X1 | K1 |
| 6 | CONN_3 | PIN_ARRAY_3X1 | K2, K3, K4, K5, K6, K7 |
Adapter design files
The KiCad project lives in the selvanair/potentiometer repository on GitHub; these links point at the commit this page was built from.
Adapter: common questions
How big is the Adapter PCB?
The Adapter measures 26.7 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adapter?
8 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adapter design files?
From the selvanair/potentiometer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Adapter design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which selvanair chose for the repository.
More boards in potentiometer
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979