Multiplexer
selvanair·potentiometer·hardware/pcbs/multiplexer_old/multiplexer.kicad_pcb
About the Multiplexer PCB
Multiplexer is an open source PCB design by selvanair, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 81.3 × 88.9 mm, with 23 components from 16 distinct parts.
Other key parts include the ZXRE060ET5DI, WM17453, MAX6176AASA+ and ADG44X. By type, the board carries 8 capacitors, 5 connectors, 4 ICs, 3 modules and 2 relays.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, firmware and software for IO Rodeo's Potentiostat Shield.
Hardware design, firmware and software for IO Rodeo's Potentiostat Shield.
Designed as a shield for teensy 3.2 development board. 12-bit voltage output with four range settings: +/- 1, 2, 5, 10V 16-bit current measurement with four range settings: +/- 1, 10, 100, 1000 uA ranges Can be programmed over USB using the Arduino IDE (teensyduino). Expansion headers with DIO, analog inputs, UART, I2C, and SPI Schematic
Main components on the Multiplexer
Multiplexer bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ZXRE060ET5DI ADG44X Digikey | 16-SOIC-0154 | U1 |
| 1 | WM17453 ADG44X Digikey | 16-SOIC-0154 | U2 |
| 1 | MAX6176AASA+ ADG44X Digikey | 16-SOIC-0154 | U3 |
| 1 | ADG44X Digikey | 16-SOIC-0154 | U4 |
| 3 | VAL** | 4-40 | M1, M2, M3 |
| 2 | ED2635 CONN_5X2 Digikey | 5X2_SHRD_HEADER | P1, P2 |
| 1 | ED2635 CONN_2 Digikey | PIN_ARRAY_2X1 | P3 |
| 1 | 923345-01 CONN_2 Digikey | PIN_ARRAY_2X1 | P4 |
| 1 | 923345-01 CONN_7 Digikey | CONNBLOCK7 | P5 |
| 1 | VAL** | 4-40 | 4-40 |
| 1 | S1111EC-03 CONN_3 Digikey | PIN_ARRAY_3X1 | K1 |
| 1 | CONN_3 | CONNBLOCK3 | K2 |
| 2 | 311-1136-1 0.1uF Digikey | SM0805 | C1, C5 |
| 2 | 311-1361-1 0.1uF Digkey | SM0805 | C2, C6 |
| 2 | 490-3335-1 0.1uF Digkey | SM0805 | C3, C7 |
| 2 | 490-5523-1 0.1uF Digikey | SM0805 | C4, C8 |
Multiplexer design files
The KiCad project lives in the selvanair/potentiometer repository on GitHub; these links point at the commit this page was built from.
Multiplexer: common questions
How big is the Multiplexer PCB?
The Multiplexer measures 81.3 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multiplexer?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Multiplexer design files?
From the selvanair/potentiometer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Multiplexer design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which selvanair chose for the repository.
More boards in potentiometer
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979