Link Lora Module

semtronik·link-hardware·board/link-mod-lr-brd/link-mod-lr-brd.kicad_pcb

Link Lora Module layout, top view — open source board by semtronik

About the Link Lora Module

Link Lora Module is an open source PCB design by semtronik, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50 × 65 mm, with 13 components from 7 distinct parts.

Other key parts include the WIO-SX1262. By type, the board carries 7 resistors, 3 connectors, 2 capacitors and 1 IC.

It belongs with the rf & radio designs in this gallery.

From the project

Open hardware for the Semtronik Link devices: ESP32-S3 base board, interface modules and enclosure. KiCad and Fusion sources, CERN-OHL-S v2.

LoRa interface module of the Link platform. Plugged onto the base board, it makes a Link-LR: a LoRa P2P radio on 868/915 MHz.

Part of link-hardware. See the repository README for naming, versioning and release conventions.

The board is 60 × 50 mm. It carries the radio module and little else: decoupling, pull-ups and the connector to the base. The antenna leaves through a u.FL to SMA pigtail to the enclosure.

Main components on the Link Lora Module

Link Lora Module bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
WIO-SX1262
Wio-SX1262
SeedStudio
U1
2
61300811821
Socket-2.54mm-VR
Wurth
J1, J3
1
BF050-20-A-B-0400-0300-L-G
Header-2x10-2mm-VR
GCT
J2
1
CL21A106KAYNNNE
10uF
Samsung
C1
1
CC0603KRX7R9BB104
0.1uF
Yageo
C2
3
RC0603FR-0710KL
10k
Yageo
R1, R2, R3
4
RC0805FR-070RL
0R
Yageo
R4, R5, R6, R7

Link Lora Module design files

The KiCad project lives in the semtronik/link-hardware repository on GitHub; these links point at the commit this page was built from.

Link Lora Module: common questions

How big is the Link Lora Module?

The Link Lora Module measures 50 × 65 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Link Lora Module?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Link Lora Module design files?

From the semtronik/link-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Link Lora Module design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which semtronik chose for the repository.

More boards in link-hardware

Similar boards