Link Base Board

semtronik·link-hardware·board/link-base-brd/link-base-brd.kicad_pcb

Link Base Board layout, top view — open source ESP32 board by semtronik

About the Link Base Board

Link Base Board is an open source ESP32 PCB design by semtronik, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 94 × 65 mm, with 78 components from 38 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the BQ24074RGTR, MAX17048G+, TPS62821DLCR, PCF8563T and CAT4104V-GT3. By type, the board carries 31 resistors, 23 capacitors, 6 ICs, 5 connectors, 5 diodes and 3 transistors.

It belongs with the power & battery designs in this gallery.

From the project

Open hardware for the Semtronik Link devices: ESP32-S3 base board, interface modules and enclosure. KiCad and Fusion sources, CERN-OHL-S v2.

Base board of the Link platform: MCU, display, power and battery management. It carries no field interface of its own — that is the job of the interface module it hosts, which makes the same base a Link-LR or a Link-485.

Part of link-hardware. See the repository README for naming, versioning and release conventions.

Power comes from USB-C or a Li-ion cell, with charging and power-path management on board — the device keeps running while charging.

Main components on the Link Base Board

Link Base Board bill of materials (BOM)

78 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ24074RGTR
BQ24074RGT
Texas Instruments
U1
1
MAX17048G+
Analog Devices
U2
1
TPS62821DLCR
TPS62821
Texas Instruments
U3
1
ESP32-S3-WROOM-1-N16R8
Espressif
U4
1
PCF8563T
NXP
U5
1
CAT4104V-GT3
onsemi
U6
2
AO3401A
Alpha & Omega Semiconductor Inc.
Q1, Q3
1
AO3400A
Alpha & Omega Semiconductor Inc.
Q2
1
CM8V-T1A-32.768KHZ-9PF-20PPM-TA-QC
32.768kHz
Micro Crystal AG
Y1
1
CON-Header-2x03-2.54mm-VR
J2
1
621320242921
CON-Header-2x10-2mm-HR
Wurth
J3
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
GCT
J5
1
52271-0679
Molex
J6
1
54132-4062
Molex
J7
2
MF-NSMF075-2
0.75A
Bourns
F1, F2
1
EVQ-PUA02K
SW-SPST-EVQPUA02K
Panasonic
SW1
4
1N4148W
SMC Diode Solutions
D1, D2, D3, D4
1
PRTR5V0U2X
Nexperia
D6
1
470nH 4.5A
Murata
L1
7
CL21A106KAYNNNE
10uF
Samsung
C1, C2, C4, C9, C12, C21, C23
Show 18 more
QtyPartRefs
1
C1608X5R1A106K080AC
10uF
TDK
C3
1
CC0603KRX7R9BB103
10nF
Yageo
C5
6
CC0603KRX7R9BB104
0.1uF
Yageo
C6, C8, C13, C22, C24, C25
1
CL10C121JB81PNC
120pF
Samsung
C7
2
CL21A226MPQNNNE
22uF
Samsung
C10, C11
2
CL10A105KB8NNNC
1uF
Samsung
C14, C17
3
CL10C150JB8NNNC
15pF
Samsung
C15, C16, C18
10
RC0603FR-0710KL
10k
Yageo
R1, R15, R16, R17, R18, R19, R20, R23 +2
1
RC0603FR-073KL
3k
Yageo
R2
10
RC0603FR-07100KL
100k
Yageo
R3, R4, R5, R6, R7, R11, R14, R32 +2
1
RC0603FR-071K5L
1.5k
Yageo
R8
1
RC0603FR-071K8L
1.8k
Yageo
R9
1
RC0603FR-071ML
1M
Yageo
R10
1
RC0603FR-07453KL
453k
Yageo
R12
1
RC0603FR-07150KL
150k
Yageo
R13
2
RC0603FR-0722RL
22R
Yageo
R21, R22
2
RC0603FR-075K1L
5.1k
Yageo
R30, R31
1
RC0603FR-073K3L
3.3k
Yageo
R35

Link Base Board design files

The KiCad project lives in the semtronik/link-hardware repository on GitHub; these links point at the commit this page was built from.

Link Base Board: common questions

What microcontroller does the Link Base Board use?

The Link Base Board is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the Link Base Board?

The Link Base Board measures 94 × 65 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Link Base Board?

78 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Link Base Board design files?

From the semtronik/link-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Link Base Board design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which semtronik chose for the repository.

Can I test firmware for the Link Base Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in link-hardware

Similar boards