Pacman
sendyyeah·pacman
About the Pacman PCB
Pacman is an open source RP2040/RP2350 PCB design by sendyyeah, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 227.4 × 78 mm, with 137 components from 19 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q128JVS. By type, the board carries 49 switches, 47 diodes, 16 capacitors, 12 LEDs, 6 resistors and 3 ICs.
It belongs with the keyboards designs in this gallery.
From the project
40% Ortholinear Keyboard based on Raspberry RP2040
Main components on the Pacman
Pacman bill of materials (BOM)
137 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | RP2040-QFN-56 | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | RESET | SW_SPST_TL3342 | J1 |
| 1 | BOOT | SW_SPST_TL3342 | J2 |
| 46 | MX_LED | MXOnly-1U-Hotswap | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_EC11 | SW42, SW43 |
| 1 | MX_LED | MXOnly-2U-Hotswap-ReversedStabilizers | SW42_2 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 12 | SK6812MINI | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +4 |
| 47 | D | D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8 +39 |
| 10 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 2 | 1u | C_0402_1005Metric | C10, C11 |
| 2 | 27p | C_0402_1005Metric | C12, C13 |
| 2 | 10u | C_0402_1005Metric | C14, C15 |
| 2 | 27.4 | R_0402_1005Metric | R1, R3 |
| 2 | 1k | R_0402_1005Metric | R2, R6 |
| 2 | 5.1k | R_0402_1005Metric | R4, R5 |
Pacman design files
The KiCad project lives in the sendyyeah/pacman repository on GitHub; these links point at the commit this page was built from.
- Layoutpacman.kicad_pcb
- Schematicpacman.kicad_sch
Pacman: common questions
What microcontroller does the Pacman use?
The Pacman is built around the RP2040, from the RP2040/RP2350 family.
How big is the Pacman PCB?
The Pacman measures 227.4 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pacman?
137 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pacman design files?
From the sendyyeah/pacman repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pacman design in my own project?
Yes, under the terms of its GPL-3.0 license, which sendyyeah chose for the repository.
Can I test firmware for the Pacman without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k