Periferico-Teclado-Raton
Sergio-De-Anca·Periferico-Teclado-Raton·PCB_TFG/PCB_TFG.kicad_pcb
About the Periferico-Teclado-Raton PCB
Periferico-Teclado-Raton is an open source ESP32 PCB design by Sergio-De-Anca, published on GitHub. It is a 2-layer board measuring 134.3 × 61.5 mm, with 17 components from 17 distinct parts.
Its main chip is the ESP32_NODEMCU, from the ESP32 family. Other key parts include the Conversor. By type, the board carries 8 switches, 4 connectors, 2 ICs, 2 resistors and 1 test point.
It belongs with the sensors designs in this gallery.
From the project
Este es un trabajo de fin de grado en Ing. Inf. de computadores de la Universidad de Sevilla realizado por Sergio Isidoro De Anca Garabito.
Si tiene dudas sobre el proyecto, contactar por email: Sergioanca14@gmail.com
Main components on the Periferico-Teclado-Raton
Periferico-Teclado-Raton bill of materials (BOM)
17 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU | U1 |
| 1 | Conversor | Conversor | U3 |
| 1 | JST | JST_S2B-PH-K-S_LF__SN_ | J1 |
| 1 | TFT_Pantalla | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Joystick1 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Joystick2 | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Switch1 | SW_Cherry_MX_1.00u_Plate | SW1 |
| 1 | Switch2 | SW_Cherry_MX_1.00u_Plate | SW2 |
| 1 | Switch3 | SW_Cherry_MX_1.00u_Plate | SW3 |
| 1 | Switch4 | SW_Cherry_MX_1.00u_Plate | SW4 |
| 1 | Switch5 | SW_Cherry_MX_1.00u_Plate | SW5 |
| 1 | Switch6 | SW_Cherry_MX_1.00u_Plate | SW6 |
| 1 | STEVAL-MKI | STEVAL-MKI229A | SW7 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW8 |
| 1 | USBCBateria | TP4056-Module | TP1 |
| 1 | R_SDA_IMU | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | R_SCL_IMU | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
Periferico-Teclado-Raton design files
The KiCad project lives in the Sergio-De-Anca/Periferico-Teclado-Raton repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB_TFG/PCB_TFG.kicad_pcb
- SchematicPCB_TFG/PCB_TFG.kicad_sch
Periferico-Teclado-Raton: common questions
What microcontroller does the Periferico-Teclado-Raton use?
The Periferico-Teclado-Raton is built around the ESP32_NODEMCU, from the ESP32 family.
How big is the Periferico-Teclado-Raton PCB?
The Periferico-Teclado-Raton measures 134.3 × 61.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Periferico-Teclado-Raton?
17 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Periferico-Teclado-Raton design files?
From the Sergio-De-Anca/Periferico-Teclado-Raton repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Periferico-Teclado-Raton design in my own project?
The repository has no license, so all rights stay with Sergio-De-Anca. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Periferico-Teclado-Raton without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k