Arduino
Serialize71·Arduino-PCB
About the Arduino PCB
Arduino is an open source AVR/Arduino PCB design by Serialize71, published on GitHub under the MIT license. It is a 2-layer board measuring 74.5 × 45 mm, with 19 components from 17 distinct parts.
Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the LM78M05_TO220 and DHT11. By type, the board carries 6 connectors, 5 capacitors, 3 ICs, 3 resistors, 1 crystal and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Custom arduino with dht11
This is an arduino with dht11 temperature and humidity
In this design I used ATmega328p which is Through-hole microcontroller
Also connected all pins with pin sockets

Main components on the Arduino
Arduino bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM78M05_TO220 | TO-220-3_Vertical | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | ATmega328-P | DIP-28_W7.62mm | U3 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | SPI | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Serial | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Barrel_Jack | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | Screw_Terminal_01x02 | Screw_Terminal_3.5mm-2-Blue | J4 |
| 1 | A-D (I/O) | PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | PWM | PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 22pf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 1uf | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | C | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 0.1uf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 200ohm | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2, R3 |
Arduino design files
The KiCad project lives in the Serialize71/Arduino-PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutarduino.kicad_pcb
- Schematicarduino.kicad_sch
Arduino: common questions
What microcontroller does the Arduino use?
The Arduino is built around the ATmega328-P, from the AVR/Arduino family.
How big is the Arduino PCB?
The Arduino measures 74.5 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduino design files?
From the Serialize71/Arduino-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arduino design in my own project?
Yes, under the terms of its MIT license, which Serialize71 chose for the repository.
Can I test firmware for the Arduino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k