MorseDeck-Terminal
SethHibpshman·MorseDeck-Terminal·hardware/kicad_project_files/morsedeck_terminal.kicad_pcb
About the MorseDeck-Terminal PCB
MorseDeck-Terminal is an open source ESP32 PCB design by SethHibpshman, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 55 × 70 mm, with 5 components from 4 distinct parts.
Its main chip is the ESP32-S3 Mount, from the ESP32 family. By type, the board carries 2 resistors and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
A standalone Morse code keyer and trainer built on the ESP32-S3, featuring real-time decoding, four keying modes, a rotary settings menu, and T9-style keyboard replay.
- Overview - Functionality - Operating Modes - Keying Modes - Morse Decoding - Keyboard Replay Mode - Settings Menu - System Design - Hardware - PCB Design - Software - Bill of Materials - Author - AI Disclosure - License
MorseDeck Terminal is a fully self-contained Morse code keyer and trainer built on the ESP32-S3 and programmed in MicroPython. The device supports professional-grade iambic keying with automatic real-time decoding, a rotary encoder settings interface, multi-tap keyboard input, and serial output to an external display, all running on a custom PCB in a 3D-printed enclosure.

MorseDeck-Terminal bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.5mm Aux Jack | 54-00174_TEN | J1 |
| 1 | ~ | ESP32-S3 Mount | ESP32-S3 |
| 1 | ~ | PinSocket_1x04_P2.54mm_Vertical | SSD1306 |
| 2 | R_US | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
MorseDeck-Terminal design files
The KiCad project lives in the SethHibpshman/MorseDeck-Terminal repository on GitHub; these links point at the commit this page was built from.
MorseDeck-Terminal: common questions
What microcontroller does the MorseDeck-Terminal use?
The MorseDeck-Terminal is built around the ESP32-S3 Mount, from the ESP32 family.
How big is the MorseDeck-Terminal PCB?
The MorseDeck-Terminal measures 55 × 70 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the MorseDeck-Terminal?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the MorseDeck-Terminal design files?
From the SethHibpshman/MorseDeck-Terminal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MorseDeck-Terminal design in my own project?
Yes, under the terms of its GPL-3.0 license, which SethHibpshman chose for the repository.
Can I test firmware for the MorseDeck-Terminal without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k