Controls flex antenna analyzer
shabaz123·antenna-analyzer·kicad-source/controls-flex/controls-flex-antenna-analyzer.kicad_pcb
About the Controls flex antenna analyzer PCB
Controls flex antenna analyzer is an open source PCB design by shabaz123, published on GitHub. It is a 2-layer board measuring 55.3 × 87.5 mm, with 6 components from 6 distinct parts.
By type, the board carries 2 connectors, 2 test points, 1 switch and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
There's a 4-position rotary selector knob. By using that, it is possible to select SWR or R/Z modes, and observe these values on the built-in moving-coil meter movement. The meter is fitted with a detailed scale, although the diagram here just shown LO/HI.
There's a 4-position rotary selector knob. By using that, it is possible to select SWR or R/Z modes, and observe these values on the built-in moving-coil meter movement. The meter is fitted with a detailed scale, although the diagram here just shown LO/HI.
(1) Connect a low-power HF source to the RF input on the instrument, and ensure that nothing is attached to the antenna connector (to simulate a bad antenna)

Controls flex antenna analyzer bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | flex-8way-2.54 | J2 |
| 1 | 5k LIN | Potentiometer_RD701F | P1 |
| 1 | RS1010-2Pole-4Pos | RS1010 | SW1 |
| 1 | METER+ | TestPoint_Plated_Hole_1.8mm | TP1 |
| 1 | METER- | TestPoint_Plated_Hole_1.8mm | TP2 |
| 1 | 470R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
Controls flex antenna analyzer design files
The KiCad project lives in the shabaz123/antenna-analyzer repository on GitHub; these links point at the commit this page was built from.
Controls flex antenna analyzer: common questions
How big is the Controls flex antenna analyzer PCB?
The Controls flex antenna analyzer measures 55.3 × 87.5 mm, has 2 copper layers and is 0.16 mm thick.
How many components are on the Controls flex antenna analyzer?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Controls flex antenna analyzer design files?
From the shabaz123/antenna-analyzer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Controls flex antenna analyzer design in my own project?
The repository has no license, so all rights stay with shabaz123. Use it as a reference, and ask the author before reusing the design.
More boards in antenna-analyzer
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568