EasyL1105
shabaz123·easyL1105·easyL1105_KiCad_source/MSPM0L1105_dev_board.kicad_pcb
About the EasyL1105 PCB
EasyL1105 is an open source PCB design by shabaz123, published on GitHub. It is a 2-layer board measuring 64.9 × 38.1 mm, with 50 components from 35 distinct parts.
Other key parts include the MSPM0L1105TDGS28R, CH340K, SRV05-4 and MIC5209-3.3YS. By type, the board carries 20 resistors, 9 capacitors, 7 connectors, 6 diodes, 4 ICs and 3 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
MSPM0L1105 Microcontroller
KiCad project files for the easyL1105 Rev 2 board
Main components on the EasyL1105
EasyL1105 bill of materials (BOM)
50 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSPM0L1105TDGS28R | VSSOP28-DGS-TI | U1 |
| 1 | CH340K | SSOP-10-1EP_CH340K | U2 |
| 1 | SRV05-4 | SOT23-6 | U3 |
| 1 | MIC5209-3.3YS | SOT-223 | U4 |
| 1 | BC857 | SOT-23-NEW | Q3 |
| 1 | IO_A | PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | IO_B | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | UART-SELECT | PinHeader_2x5 | J3 |
| 1 | USB_C_Receptacle_USB4085 | USB_C_Receptacle_GCT_USB4085_improved | J4 |
| 1 | SWD | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | LDO_JUMPER | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | GND_JUMPER | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | RESET | Tact-SW-4x3mm-body | SW1 |
| 1 | BSL_BOOT | Tact-SW-4x3mm-body | SW2 |
| 1 | USER_PA16 | Tact-SW-4x3mm-body | SW3 |
| 1 | GREEN | LED_0603_or_0805 | D1 |
| 1 | BLUE | LED_0603_or_0805 | D2 |
| 1 | 1N4001W | D_SOD-123-pins12 | D3 |
| 1 | RED | LED_0603_or_0805 | D4 |
| 2 | BAS16 | SOT-23-NEW | D5, D6 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.47u | Cap-Tant-T491A | C1 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C7 |
| 3 | 10u | Cap-Tant-CaseB | C4, C8, C9 |
| 1 | 10n | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5 |
| 1 | 100k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 3 | 100R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R12 |
| 4 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R7, R17 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R25, R26, R27 |
| 1 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 820R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 1M | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R13 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
EasyL1105 design files
The KiCad project lives in the shabaz123/easyL1105 repository on GitHub; these links point at the commit this page was built from.
EasyL1105: common questions
How big is the EasyL1105 PCB?
The EasyL1105 measures 64.9 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EasyL1105?
50 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the EasyL1105 design files?
From the shabaz123/easyL1105 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EasyL1105 design in my own project?
The repository has no license, so all rights stay with shabaz123. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979